Draper TK58/BL Manuale operativo

EN

Original Instructions

Version 1 – May 2022

Stock No. 28106/28111 Part No. TK58/BL

TK58/GR

USER

INFORMATION

Read this manual in full before attempting

to use this product and retain it for future

use. Always use the latest version of

the manual.

1. Voltage Tester

1.1 Scope

This product is designed to test the

voltage at a given point in a circuit and

to locate breakages in cables. Any other

application is considered misuse. Draper

Tools accepts no responsibility for

improper use of this product.

Voltage testing range: 12–250V AC/DC

1.2 Safety Information

WARNING! Working with electricity is

dangerous. Always consult a suitably

qualied person if you are not certain

of what you are doing. NEVER touch

the metal blade during use.

Important: This product is NOT

a screwdriver. Using it as such is

dangerous and may cause damage to

the user or tool.

1.3 Operating Instructions

Voltage Test

Place the blade into or onto a “live”

aperture or contact and press and

hold the “Direct Test” button. An

approximation of the voltage is

indicated on the LCD display.

Induction Test

To nd a broken cable, ensure that

the supply is live, press and hold the

“Induction Break-Point Test” button and

track the blade from the plug towards

the appliance. A lightning symbol is

shown on the LCD display until a break

is detected. Repeat the test to conrm

the location.

1.4 Disposal

Dispose of this tool in accordance with

local regulations.

• DO NOT dispose of this tool with

domestic waste.

• DO NOT dispose of this tool in

unsorted municipal waste.

• DO NOT incinerate.

• DO NOT abandon in the environment.

Helpline: +44 (0) 23 8049 4344 Sales Desk: +44 (0) 23 8049 4333

General Enquiries: +44 (0) 23 8026 6355 Website: drapertools.com

Email: [email protected]

Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire, SO53 1YF, UK

2. Snap-OKnife

2.1 Health and Safety Information

WARNING! The blade in this product

is very sharp. Do not extend the blade

more than two segments. Fully retract

the blade when it is not in use.

Important: ALWAYS wear safety

goggles during use. Excessive pressure

can cause segments to break o

unintentionally. Remove blade segments

when they become blunted or worn.

2.2 Operation Instructions

Use the tab to extend and retract the

blade as necessary.

To remove blunt segments, squeeze

and slide the black removal tool away

from the end of the knife body. Extend

the blade so that the blunt segment

is clear of the guard and insert the tip

into the removal tool. Use the removal

tool to snap the segment o the blade.

Alternatively, use pliers or another

suitable gripping tool to snap o

the blade.

Important: ALWAYS snap the blade

away from you.

3. Explanationofsymbols

MM

Metric sizing

Cr

V

Chrome vanadium steel

1/4"

1/4” hex drive

Do not incinerate or throw

onto re

Do not abandon in the

environment

– WEEE –

Waste Electrical & Electronic

Equipment

Do not dispose of this product with

domestic waste

UK Conformity Assessed

European Conformity

Questo manuale è adatto per i seguenti modelli

3

Altri manuali Draper Utensili

Manuali Utensili popolari di altre marche

Martor

Martor SECUNORM 175 Manuale utente

ERKCO

ERKCO 1000 Manuale utente

jbc

jbc N4473 Manuale utente

FEINMETALL

FEINMETALL FZWZ-SET-001 Manuale utente

Worx Professional

Worx Professional Sonicrafter WU676 Manuale utente

Gage Bilt

Gage Bilt GB713SH Manuale utente

Hilti

Hilti DX 9-ENP Manuale utente

norbar

norbar NORTRONIC 34399 Manuale utente

BGS technic

BGS technic 8578 Manuale utente

Makita

Makita DHR241 Manuale utente

Motor Guard

Motor Guard JMB-1250 Manuale utente

Power Adhesives

Power Adhesives 805-12 Manuale utente

Clemco

Clemco 24189 Manuale utente

VVG

VVG VNG 903 Series Manuale utente

Hilti

Hilti FX 3-A Manuale utente

Grizzly

Grizzly H6472 Manuale utente

axing

axing BWZ 5-02 Manuale utente

Dh-Robotics

Dh-Robotics RGI-100 Come usare