Genie Super-Straddle Manuale utente

Operator's Manual

Serial Number Range

Super-Straddle

from SSP-7000

AUS

Australia

with

Maintenance

Information

Third Edition

First Printing

Part No. 1298031GT

Operator's Manual Third Edition • First Printing

Super-Straddle Part No. 1298031GT

FrontMatter

Contents

Introduction ............................................................1

Symbol and Hazard Pictorials Definitions..............5

General Safety.......................................................6

Work Area Safety...................................................7

Assembly and Disassembly...................................9

Legend................................................................ 11

Inspections.......................................................... 12

Operating Instructions......................................... 20

Maintenance ....................................................... 23

Specifications...................................................... 24

Third Edition: First Printing, September 2020

Genie is a registered trademark of Terex South Dakota, Inc. in

the U.S.A. and many other countries.

These machines comply with

AS 1418.10

Third Edition • First Printing Operator's Manual

Introduction

Part No. 1298031GT Super-Straddle 1

Intr oduct io n

About this manual

Genie appreciates your choice of our machine for

your application. Our number one priority is user

safety, which is best achieved by our joint efforts.

This book is an operation and daily maintenance

manual for the user or operator of a Genie

machine.

This manual should be considered a permanent

part of your machine and should remain with the

machine at all times. If you have any questions,

contact Genie.

Product Identification

The machine serial number is located on the serial

label.

Serial number (stamped

on inside of end frame

assembly) Serial label

Intended Use and Familiarization

Guide

The winch on the Super Straddle is only intended

to lift the Genie AWP to the appropriate height. It is

not intended to lift people. Before operating the

machine, it’s the operator’s responsibility to read

and understand this familiarization guide.

Each person must be trained to operate a

Mobile Elevating Work Platform (MEWP).

Familiarization with the MEWP must be given

to each person who is authorized, competent

and trained.

Only trained and authorized personnel should

be permitted to operate the machine.

The operator is responsible to read,

understand, and obey the manufacturer’s

instructions and safety rules provided in the

Operator’s Manual.

The Operator’s Manual is located in the

manual storage container, at the platform.

For specific product applications, see

Contacting The Manufacturer.

Operator's Manual Third Edition • First Printing

Introduction

2 Super-Straddle Part No. 1298031GT

Related machine movement:

Base frame

Telescoping base

frame

Straddle socket plug

Swivel caster lock

1. Winch

2. Lifting bar

Third Edition • First Printing Operator's Manual

Introduction

Part No. 1298031GT Super-Straddle 3

Bulletin Distribution and

Compliance

Safety of product users is of paramount

importance to Genie. Various bulletins are used by

Genie to communicate important safety and

product information to dealers and machine

owners.

The information contained in the bulletins is tied to

specific machines using the machine model and

serial number.

Distribution of bulletins is based on the most

current owner on record along with their

associated dealer, so it is important to register your

machine and keep your contact information up to

date.

To ensure safety of personnel and the reliable

continued operation of your machine, be sure to

comply with the action indicated in a respective

bulletin.

To view any open bulletins for your machine, visit

us on the web at www.genielift.com.

Contacting the Manufacturer

At times it may be necessary to contact Genie.

When you do, be ready to supply the model

number and serial number of your machine, along

with your name and contact information. At

minimum, Genie should be contacted for:

Accident reporting

Questions regarding product applications and

safety

Standards and regulatory compliance information

Current owner updates, such as changes in

machine ownership or changes in your contact

information. See Transfer of Ownership, below.

Transfer of Machine Ownership

Taking a few minutes to update owner information

will ensure that you receive important safety,

maintenance and operating information that

applies to your machine.

Please register your machine by visiting us on the

web at www.genielift.com or by calling us toll free

at 1-800-536-1800.

Operator's Manual Third Edition • First Printing

Introduction

4 Super-Straddle Part No. 1298031GT

Danger

Failure to obey the instructions and

safety rules in this manual will result

in death or serious injury.

Do Not Operate Unless:

You learn and practice the principles of safe

machine operation contained in this operator’s

manual.

1 Avoid hazardous situations.

Know and understand the safety rules

before going on to the next section.

2 Always perform a pre-operation inspection.

3 Always perform function tests prior to use.

4 Inspect the workplace.

5 Only use the machine as it was intended.

You read, understand and obey the

manufacturer’s instructions and safety

rules—safety and operator’s manuals and

machine decals.

You read, understand and obey employer’s

safety rules and worksite regulations.

You read, understand and obey all applicable

governmental regulations.

You are properly trained to safely operate the

machine.

Safety Sign Maintenance

Replace any missing or damaged safety signs.

Keep operator safety in mind at all times. Use mild

soap and water to clean safety signs. Do not use

solvent-based cleaners because they may damage

the safety sign material.

Hazard Classification

Decals on this machine use symbols, color coding,

and signal words to identify the following:

Safety alert symbol

—

used to alert

you to potential personal injury

hazards. Obey all safety

messages that follow this symbol

to avoid p

ossible injury or death.

Indicates a hazardous situation

which, if not avoided, will result in

death or serious injury.

Indicates a hazardous situation

which, if not avoided, could result

in death or serious injury.

Indicates a hazardous situation

which, if not avoided, could result

in minor or moderate injury.

Indicates a property damage

message.

Third Edition • First Printing Operator's Manual

Symbol and Hazard Pictorials Definitions

Part No. 1298031GT Super-Straddle 5

Symb ol an d H az ard Pi ct orial s D efi niti ons

Read the operator’s

manual Tip-over hazard Insert retaining pins Tip-over hazard Insert outriggers

Crushing hazard Keep away from

moving parts Straddle socket plug Base frame Telescoping base

frame

Ladder storage Pull gray tab to

release pin Outrigger load Use on X-pattern

outriggers. Do not use on

pinwheel outriggers.

Maximum wind speed Indoor Use Only

Operator's Manual Third Edition • First Printing

General Safety

6 Super-Straddle Part No. 1298031GT

Gener al Safety

Third Edition • First Printing Operator's Manual

Work Area Safety

Part No. 1298031GT Super-Straddle 7

Work Ar ea Safety Tip-over Hazards

Do not use the Super-Straddle except with a Genie

AWP.

Do not use on a sloping surface unless all four

swivel casters are locked in a position crossing the

slope and their brakes are applied.

Do not operate the Super-Straddle unless all four

Genie AWP outriggers are properly installed in the

Super-Straddle base, screw jack pads are in firm

contact with the ground and the straddle platform

is level.

Do not operate the machine unless all retaining

pins are properly installed.

Do not operate the Super-Straddle, or adjust or

remove outriggers when the platform is occupied

or elevated.

Do not operate the machine on a slope unless it is

positioned with the length running with the slope

and the straddle platform is level.

Do not use the Genie Super Straddle outdoors.

Some Genie AWP outriggers are rated for outdoor

use. When using these outriggers with the

Super-Straddle, the Super-Straddle must only be

used indoors.

Do not move or operate the machine on stairs.

Do not push off or pull toward any object outside of

the platform.

When raising the AWP platform, follow the ratings

for allowable side force and number of occupants

in the Genie AWP operator’s manual.

Do not alter or disable machine components that in

any way affect safety and stability.

Do not alter or modify a mobile elevating work

platform without prior written permission from the

manufacturer.

Use only Genie approved replacement parts.

Collision Hazards

Be aware of overhead obstructions. The

Super-Straddle adds 4 ft / 1.2 m to the working

height of the Genie AWP being used.

Crushing Hazards

Keep hands away from end frame plates and

moving parts when lowering the Super-Straddle.

Electrocution Hazards

The Super-Straddle is not electrically insulated and

neither by itself or together with the Genie AWP

will not provide protection from contact with or

proximity to electrical current.

Operator's Manual Third Edition • First Printing

Work Area Safety

8 Super-Straddle Part No. 1298031GT

Damaged Machine Hazards

Do not use a damaged or

malfunctioning machine.

Do not use the machine if either

winch

cable is worn, frayed or

kinked.

Do not use a machine with less

than

4 wraps of cable on the

winch drum when the Super

Straddle is fully lowered.

Conduct a thorough pre-operation inspection of the

machine and test all functions before each work

shift. Immediately tag and remove from service a

damaged or malfunctioning machine.

Be sure all maintenance has been performed as

specified in this manual and the appropriate

service manual.

Be sure all decals are in place and legible.

Be sure the Genie AWP operator’s, safety, and

responsibilities manuals are complete, legible and

in the storage container located on the AWP

platform.

Be sure the Super-Straddle operator’s manual is

complete, legible and in the storage container

located on the Super-Straddle.

Maintain proper lubrication on the winch. Do not

allow oil or grease on braking surfaces.

Altri manuali per Super-Straddle

Indice

Altri manuali Genie Sistema di sollevamento

Genie

Genie GS-2668 DC Manuale utente

Genie

Genie Lift Guard GR-12 Manuale utente

Genie

Genie AWP Super Series 114002 Manuale utente

Genie

Genie GTH-1048 Manuale utente

Genie

Genie X-135/70 Manuale utente

Genie

Genie Z-34/22 Manuale utente

Genie

Genie AWP-15S Manuale utente

Genie

Genie GS-2046 Manuale utente

Genie

Genie ZX-135/70 with Jib-Extend Manuale di installazione e funzionamento

Genie

Genie Runabout GR-8 Manuale utente

Genie

Genie Z-60/34 Manuale utente

Genie

Genie gS-1530/32 Manuale di installazione e funzionamento

Genie

Genie GS-2646AV Manuale di installazione e funzionamento

Genie

Genie TZ-34/20 Manuale utente

Genie

Genie Z-45/25 Manuale utente

Genie

Genie Load Lifter 5.5 Manuale utente

Genie

Genie S-65 Manuale utente

Genie

Genie GTH-2506 Stage A Manuale utente

Genie

Genie GS-2668 RT Manuale utente

Genie

Genie GS-1530 Manuale utente

Genie

Genie GS-2046 Manuale utente

Genie

Genie Z-30/20N Manuale di installazione e funzionamento

Genie

Genie GS-3384 Manuale di installazione e funzionamento

Genie

Genie GS-1530 Manuale utente

Manuali Sistema di sollevamento popolari di altre marche

morse

morse 82H-124 Manuale utente

Braun

Braun NL955 Series Manuale utente

haacon

haacon 1889.10 Manuale utente

Protekt

Protekt AT 252 Manuale utente

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manuale utente

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manuale utente

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manuale utente

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manuale utente

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manuale di programmazione

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manuale di programmazione

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manuale di programmazione

BERG

BERG BeNomic EasyLeaf Manuale utente

Powermate

Powermate LiftGate LG-3 Manuale utente

Snorkel

Snorkel TM12 Series Manuale utente

Terberg

Terberg OMNIDEKA Manuale utente

Harmar Mobility

Harmar Mobility AL625 Istruzioni operative

Rotary

Rotary SPO16 Manuale utente

Ricon

Ricon Mirage F9T Manuale utente