Genie LCM16-IP Manuale utente

Please read these instructions carefully before operating the unit

and keep for further reference.

User Manual

Lift / Elevator TCP/IP Control

Module with 6A DC12V PSU

LCM16-IP

Index

Chapter 1 System Overview .............................................................................................................. 3

1.1 Overview ............................................................................................................................ 3

1.2 Intelligent Elevator ............................................................................................................ 3

1.3 System components ........................................................................................................... 4

1.4 Diagram ............................................................................................................................. 5

1.5 Application ........................................................................................................................ 7

Chapter 2 LCM16-IP Elevator Controller ......................................................................................... 8

2.1 Overview ............................................................................................................................ 8

2.2 Features .............................................................................................................................. 9

2.3 Specification ...................................................................................................................... 9

2.4 Wiring .............................................................................................................................. 10

2.5 socket define .................................................................................................................... 10

2.6 DIP Switch ....................................................................................................................... 13

Chapter3 ELEVATOR CONTROL EXPAND BOARDS Elevator Expand Controller Board ..... 15

3.1 Overview .......................................................................................................................... 15

3.2 Features ............................................................................................................................ 15

3.3 Specification .................................................................................................................... 15

3.4 wiring ............................................................................................................................... 16

3.5 socket define .................................................................................................................... 16

Chapter 4 FLP8104 .......................................................................................................................... 17

4.1 Overview .......................................................................................................................... 17

4.2 Features ............................................................................................................................ 17

4.3 Parameters ........................................................................................................................ 17

4.4 Wiring diagram ................................................................................................................ 18

4.5 Sockets ............................................................................................................................. 18

Chapter 5 FSC8104 .......................................................................................................................... 22

5.1 Overview .......................................................................................................................... 22

5.2 Features ............................................................................................................................ 22

5.3 Parameters ........................................................................................................................ 23

5.4 Wiring diagram ................................................................................................................ 23

5.5 Sockets ............................................................................................................................. 23

Chapter 6 Operation in sphinx ......................................................................................................... 26

Chapter 1 System Overview

1.1

Overview

With the rapid development of high technology, intelligent management has entered people's

lives. The modern city is surrounded by high-rise buildings, and the elevator has become an

indispensable tool for people to go up and down. The intelligent elevator system is a high-tech

product that integrates information management, computer control and smart card technology with

IC/ID card as medium. It is possible to control the entrance and exit of the floor, and selectively

release or prohibit the personnel who want to enter and exit the floor. It has a variety of functions

such as authorization, recording, query, statistics, anti-theft, alarm, etc., and has a very high

security capability.

The intelligent elevator management system has provided a scientific, efficient and safe

means for the implementation of modern management, and has been widely adopted. It has its

own specialties in terms of security, convenience, manageability, applicability, etc. The application

fields of intelligent elevator management systems are also becoming wider and wider. It has a

wide range of applications in factories, government agencies, intelligent buildings, smart

communities, office buildings, hotels, etc., which greatly improves the efficiency of managers and

the security level within the management area.

1.2

Intelligent Elevator

l Convenient

By authorized card to swipe on the card reader, you can reach the designated floor and it is

very easy to use.

l Adjust permissions at any time

The intelligent floor management system can adjust its permissions anytime, including

opening objects, locations, time, etc., to achieve real-time control.

l Flexible configuration

Modular design, choose the corresponding function modules as needed.

l High security

The cards in the intelligent system each have an independent key, which cannot be copied.

When the card is lost, after reported, the lost card can no longer be used. if the card is found again,

the loss can be released and the card can be used again. Each time you use the card to open the

door, you can automatically record it, which is convenient for inquiring personnel data about in

and out.

l Multi-purpose

Except the intelligent elevator management function, the KEYKING smart card can also be

used in parking, attendance, consumption and many other aspects, it reduces much investment and

costs.

l Powerful

Customized for elevator users, integrated with multiple functional modules, fully meet

customer needs.

lPermission

When the card is issued, the permission of the card is authorized. After the user enters in the

elevator and swipes the card on the card reader, the access control system determines whether the

card is valid and has the permission to reach the floor, and automatically select the corresponding

floor, and the elevator will go up to the designated floor.

lDesignated floor

The card user is authorized to reach the designated floor. After the user enters in the elevator

and swipes the card on the card reader, the access control system determines whether the card is

valid, and the elevator can go to the designated floor without pressing the elevator floor button.

Otherwise, button is invalid and the elevator is restricted.

lTemporary visitor function

Temporary cards can be issued for visitors. You can set the effective time, the floor, the

elevator, and the in-out times .When the temporary visitor leaves, you can cancel the card and

cancel the permission of this temporary card.

lMutual access function

The households swipe the card normally, the system is opened to the self-occupied floor (by

default). If the household needs to visit other friends in the same building, press the “Re-visit”

button after entering the elevator. At this time, the system enters the “mutual access mode”

working state,

lIntercom

When the visitor calls the household, after the household confirmed, the intercom system

opens the door, the elevator will be called. On the first floor, a set of floor signals is provided to

the main control board. The buttons on the floor are valid. After the vistor enter the elevator, the

corresponding floor button can be pressed to drive the elevator to the destination floor.

1.3

System components

lSphinx

lElevator Controller

lElevator Expand Controller Board

lFLP8104

lFSC8105

lReader

lOther accessories, such as printers.

1.4

Diagram

lSystem wiring

lWiring diagram when the floor signal is an external signal (such as used for the

shidean protocol)

1.5

Application

Elevator control, floor management; VIP cabinet management, cabinet control.

Chapter 2 LCM16-IP Elevator Controller

2.1

Overview

The LCM16-IP is the main component of the elevator

control system, which can independently control the 16-floors

elevator. Each LCM16-IP elevator controller can support seven

elevator control expand boards to control 128-floors elevator.

The LCM16-IP main control board works in two working

modes: normal mode and mutual access mode, adding a “mutual

access” button to each of the elevator cab; the resident swipes

the card, and the system opens the self-occupied floor (the

default home), This is the “normal mode”; if the household

needs to visit other friends in the same building, press the

“mutual access” button after entering the elevator. At this time,

the system enters the “mutual access” mode.

1. Normal mode

As shown in the following figure: the Control of floor buttons (only one floor for example):

In the above picture, S3 is the floor button on the original elevator control panel, S1and S2

are added analog buttons (relay contacts), series S1 is the NC contact of the relay we use, and S2

uses the NO contact.

Due to the needs of the system, the floor collection board also needs to collect the Working

status of each elevator. The acquisition method is shown in the following figure.

Since the original control mode or circuit of the elevator has not been changed, even if our

Controller

Lift

Pannel

system is powered down or other conditions occur, the elevator can work normally without being

affected by the above contact. Of course, we have taken multiple security measures at the same

time (such as using a highly reliable switching power supply, adding a clutter suppressor to the

input and output ports, using hardware watchdog technology, using highly reliable TCP/IP

communication, all communication The data is based on CRC check technology, etc.) to ensure

that the system will not drop and crash.

2. Visitor mode:

2.2

Features

lusing RS485 communication, the longest distance can reach 1200m

lModular design, flexible configuration, easy to upgrade

lSeparate design by controller and card reader, high security

lThe main control board and card reader adopt RS485 and Wiegand communication

modes, and the choice is flexible.

lWiegand mode is compatible with multiple Wiegand readers on the market

lWith backup battery, data will not be lost when power is off, battery is available for 5

years

lNormal mode, mutual access mode. The controller has several working states such as

sleep, safety, NO, and NC.

lProgrammable linkage control and programmable card reader protocol settings

lDirect control of the status of each output relay

lRelay action time and card interval can be set

lWith fire Alarm signal input interface, when the fire switch signal is activated, the

elevator system does not work, and the elevator returns to the original state (the fire signal

provided by the elevator company should be a passive dry contact signal)

lThe system supports offline operation (smart) and flexible networking.

lMain functions: visitor function, mutual access function, call function

2.3

Specification

lCPU: 32-bit microprocessor

lControl floor: 16 floors (expandable to 128 floors)

lCommunication method: RS485, TCP/IP.

lCommunication rate: TCP/IP communication, rate 100M. RS485: 9600/4800, 1, 1, N

lInspection method: CRC-16

lStorage event: 100,000

lSupport card: 30,000 sheets

lWorking voltage: 12VDC, 3A

lPCB Dimension: 20 (L) × 14.5 (W) cm

lWorking temperature: -20 ° C to 70 ° C

lRelative humidity: 5% to 95%

2.4

Wiring

Indice

Altri manuali Genie Sistema di sollevamento

Genie

Genie Z-45/25 Manuale utente

Genie

Genie AWP-19 Manuale utente

Genie

Genie GR-20J Manuale utente

Genie

Genie gS-1530/32 Manuale utente

Genie

Genie GC-1530 Manuale utente

Genie

Genie Z-45/25 Manuale utente

Genie

Genie GS-2646AV Manuale di installazione e funzionamento

Genie

Genie Z-34/22 Manuale utente

Genie

Genie GS-1530 Manuale utente

Genie

Genie AWP-15S Manuale utente

Genie

Genie S-60 HC Manuale utente

Genie

Genie GTH-2506 Stage A Manuale utente

Genie

Genie 33547 Operators Manuale utente

Genie

Genie S-40 TRAX Manuale utente

Genie

Genie GTH-1048 Manuale utente

Genie

Genie GS-2668 RT Manuale utente

Genie

Genie GS-2046 Manuale utente

Genie

Genie GTH-4013 SX Manuale utente

Genie

Genie Load Lifter 5.5 Manuale utente

Genie

Genie GTH-844 Manuale di installazione e funzionamento

Genie

Genie Z-45/22 Manuale utente

Genie

Genie Z-40/23N Manuale di installazione e funzionamento

Genie

Genie S-45 XC Manuale di installazione e funzionamento

Genie

Genie GS-1930 Manuale utente

Manuali Sistema di sollevamento popolari di altre marche

morse

morse 82H-124 Manuale utente

Braun

Braun NL955 Series Manuale utente

haacon

haacon 1889.10 Manuale utente

Protekt

Protekt AT 252 Manuale utente

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manuale utente

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manuale utente

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manuale utente

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manuale utente

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manuale di programmazione

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manuale di programmazione

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manuale di programmazione

BERG

BERG BeNomic EasyLeaf Manuale utente

Powermate

Powermate LiftGate LG-3 Manuale utente

Snorkel

Snorkel TM12 Series Manuale utente

Terberg

Terberg OMNIDEKA Manuale utente

Harmar Mobility

Harmar Mobility AL625 Istruzioni operative

Rotary

Rotary SPO16 Manuale utente

Ricon

Ricon Mirage F9T Manuale utente