H3C LSVM1S9800FAN Manuale utente
H3C LSVM1S9800FAN &
LSVM2S9800FAN
Fan Modules User Manual
New H3C Technologies Co., Ltd.
http://www.h3c.com.hk
Document version: 6PW103-20170515
Copyright © 2013-2017, New H3C Technologies Co., Ltd. and
its licensors
All rights reserved
No part of this manual may be reproduced or transmitted in any form or
by any means without prior written consent of New H3C Technologies
Co., Ltd.
Trademarks
H3C, , H3CS, H3CIE, H3CNE, Aolynk, ,
H3Care, , IRF, NetPilot, Netflow, SecEngine, SecPath,
SecCenter, SecBlade, Comware, ITCMM and HUASAN are trademarks
of New H3C Technologies Co., Ltd.
All other trademarks that may be mentioned in this manual are the
property of their respective owners
Notice
The information in this document is subject to change without notice.
Every effort has been made in the preparation of this document to
ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any
kind, express or implied.
Environmental protection
This product has been designed to comply with the environmental
protection requirements. The storage, use, and disposal of this product
must meet the applicable national laws and regulations.
Obtaining documentation
To access the most up-to-date H3C product documentation, go to the
H3C website at http://www.h3c.com.hk.
To obtain information about installation, configuration, and maintenance,
click http://www.h3c.com.hk/Technical_Documents
To obtain software version information such as release notes,
click http://www.h3c.com.hk/Software_Download
Technical support
service@h3c.com
http://www.h3c.com.hk
Documentation feedback
You can email your comments about product documentation to
We appreciate your comments.
i
Contents
Fan tray overview ····················································································1
LSVM1S9800FAN ·············································································1
Introduction to LSVM1S9800FAN ··············································1
LSVM1S9800FAN specifications················································2
LSVM2S9800FAN ·············································································3
Introduction to LSVM2S9800FAN ··············································3
LSVM2S9800FAN specifications················································4
Installing and replacing a fan tray·························································5
Installing a fan tray ············································································5
Replacing a fan tray ··········································································8
1
Fan tray overview
LSVM1S9800FAN
Introduction to LSVM1S9800FAN
The LSVM1S9800FAN fan tray provides powerful cooling and heat
dissipation for the switch internal components. It blows cool air into the
switch from the power side to the port side. It has five fans and features
small size, fast heat dissipation, and hot swapping. It can automatically
adjust the fan speed based on the switch temperature.
Figure 1 LSVM1S9800FAN
2
1
3 4
2
(1) Captive screw
(2) Handle (The handle is in blue, indicating that the fan tray blows
cool air into the switch from the power side to the port side.)
(3) This side up sign (4) Air flow sign
The switch provides a LED on the power side panel to indicate the fan
tray operating status. When the switch is running, the LED can have the
following states:
•Green—The fan tray is operating correctly.
•Red—No fan tray is installed or the fan tray is faulty.
LSVM1S9800FAN specifications
Table 1 LSVM1S9800FAN specifications
Item Specification
Number of fans Five 40 × 40 × 56 mm (1.57 × 1.57 × 2.20 in)
fans
Air flow direction From the switch power side to the port side
Max fan speed 22100 revolutions per minute (R.P.M.)
Max air volume 105 cubic foot per minute (CFM)
Max power
consumption 130 W
Min power
consumption 18 W
Voltage 12 V
3
LSVM2S9800FAN
Introduction to LSVM2S9800FAN
The LSVM2S9800FAN fan tray provides powerful cooling and heat
dissipation for the switch internal components. It blows exhaust air out of
the switch from the port side to the power side. It has five fans and
features small size, fast heat dissipation, and hot swapping. It can
automatically adjust the fan speed based on the switch temperature.
Figure 2 LSVM2S9800FAN
(1) Captive screw
(2) Handle (The handle is in red, indicating that the fan tray blows
exhaust air out of the switch from the port side to the power side.)
(3) Air flow sign (4) This side up sign
4
The switch provides a LED on the power side panel to indicate the
operating status of the fan tray. When the switch is running, the LED can
have the following states:
•Green—The fan tray is operating correctly.
•Red—No fan tray is installed or the fan tray is faulty.
LSVM2S9800FAN specifications
Table 2 LSVM2S9800FAN specifications
Item Specification
Number of fans Five 40 × 40 × 56 mm (1.57 × 1.57 × 2.20 in)
fans
Air flow direction From the switch port side to the power side
Max fan speed 22100 revolutions per minute (R.P.M.)
Max air volume 105 cubic foot per minute (CFM)
Max power
consumption 130 W
Min power
consumption 18 W
Voltage 12 V
5
Installing and replacing a fan tray
IMPORTANT:
Before you install a fan tray,
•Make sure the air flow direction of the fan tray is as required.
•Make sure you install two fan trays of the same model for the
switch.
The installation and removal procedures for the LSVM1S9800FAN and
LSVM2S9800FAN are similar.
Installing a fan tray
To install a fan tray:
1. Wear an ESD wrist strap, and make sure it makes good skin
contact and is correctly grounded.
2. Use a Phillips screwdriver to loosen the captive screws on the
blank panel of the fan tray slot. See callout 1 in Figure 3.
3. Thread a flat-head screwdriver through the handle on the blank
panel and pull out the blank panel gently. See callout 2 in Figure
3.
Keep the removed blank panel for future use.
4. Unpack the fan tray.
5. Holding the fan tray with both hands with the upside (marked with
a "TOP" sign) up, gently push the fan tray into the slot along the
guide rails until the fan tray completely seats into the slot. See
callout 3 in Figure 3.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali H3C Unità di controllo
H3C
H3C SR6600 SPE-FWM-200 Manuale utente
H3C
H3C LSUM1TGT24FD0 Manuale utente
H3C
H3C SIC-4G-CAT6 Manuale utente
H3C
H3C PSR150-A1 Manuale utente
H3C
H3C PSR650B-12A2-F Manuale utente
H3C
H3C SecPath DC2400 Manuale utente
H3C
H3C SecPath NSQM2AC1400 Manuale utente
H3C
H3C LSQM1SDNB0 Manuale utente
H3C
H3C PSR2400-12AHAH-B Manuale utente
H3C
H3C SecPath M9000 NSQM1CGQ20 Manuale utente
H3C
H3C S9500E Series Manuale elenco delle parti
H3C
H3C SR6600 SPE-FWM Manuale utente
H3C
H3C PSR1600B-12A-B Manuale utente
H3C
H3C PSR6000 Manuale utente
H3C
H3C LSWM18CQ Manuale utente
H3C
H3C SecPath PSR300-12A2 Manuale utente
H3C
H3C PSR3000-54A Manuale utente
H3C
H3C NSQ1TGS32SF0 Manuale utente
H3C
H3C LSQM1TGT24FD0 Manuale utente
H3C
H3C MSR Router Comware 5 Series Manuale utente
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
