Keysight Technologies N1060A Manuale utente

Electrical channel input

circuits can be damaged by electro-

static discharge (ESD). Therefore,

avoid applying static discharges to the remote head’s

input connectors. Prior to connecting any coaxial cable

to the connectors, momentarily short the center and

outer conductors of the cable together. Avoid touching

the front-panel input connectors without first touching

the frame of the instrument.

Static

Sensitive

Channel Inputs

Max. input signal: ±1Vpp (+10 dBm)

Max. 1.0 mm connector torque: 4 lb-in. (0.45 Nm)

Max. 2.92 mm connector torque: 5 lb-in. (0.57 Nm)

Read accessory kit user’s guide for critical information.

Avoiding Expensive Repairs

Refer to the accessory kit user’s guide for

instructions on safely connecting devices to the N1060A

front-panel RF connectors without causing expensive

damage.

N1000A Help System

Search on

N1060A

Installation

5. Click Help > Contents to view help system. Search on

N1060A for documentation.

1. On the N1000A DCA-X, click Help > About and check

firmware version. Minimum required FlexDCA Firmware

Version is A.06.00. Download the firmware at:

www.keysight.com/comms/dca

2. Insert the N1060A into the left three front-panel slots

in the N1000A’s module bay.

3. Finger tighten the front-panel knurled locking screws.

4. Remove the screw-on channel shipping protectors.

Precision

Timebase

Input

(2.92 mm)

Recovered

Clock Output

(2.92 mm)

0.5 Vpp Nom

50 Ω

2.4-32 GHz

2 V Max

Ch A/CDR+

1V Max

Ch B/CDR

1V Max

CDR Rates

Adjustable Loop

N1060A

Precision Waveform Analyzer 50 GHz BW

Screw-on

shipping protectors

DCA-X

DCA-X Series Wide-Bandwidth Oscilloscope

N1000A

1 2 3 4

Trigger

Input

(2.92mm)

DC Cal

50Ω

DC-32GHz

2Vpp Max

Precision

Timebase

Input

(2.92mm)

50Ω

2.4-44GHz

2V Max

Marker

Position

Vertical

Horizontal

Acquisition

Armed

Triggered

Press to

select

Press to

select

Precision

Timebase

Input

(2.92mm)

Recovered

Clock Output

(2.92mm)

0.5Vpp Max

50Ω

2.4-32GHz

1.3Vpp Max

Ch A/CDR+

2V Max

Ch B/CDR

2V Max

CDR Rates

Adjustable Loop

N1060A Precision Waveform Analyzer 85 GHz BW

Locking Screws

N1060A

N1060A Precision Waveform Analyzer

Printed in USA. October, 2018

N1060-90002

*N1060-90002*

This product is designed for use in Installation

Category II and Pollution Degree 2 per IEC 1010 and respec-

tively.

If this product is not used as specified, the protec-

tion provided by the equipment could be impaired. This product

must be used in a normal condition (in which all means for

protection are intact) only.

No operator serviceable parts inside. Refer servic-

ing to qualified service personnel. To prevent electrical shock

do not remove covers.

To prevent electrical shock, disconnect the instru-

ment from mains before cleaning. Use a dry cloth or one

slightly dampened with water to clean the external case parts.

Do not attempt to clean internally.

This product has been designed and tested in accordance

with IEC Publication 1010, Safety Requirements for Electron-

ic Measuring Apparatus, and has been supplied in a safe

condition. The instruction documentation contains informa-

tion and warnings which must be followed by the user to

ensure safe operation and to maintain the product in a safe

condition.

Install the plug-in module according to the enclosure

protection provided.

This instrument does not protect against the ingress of

water. This instrument protects against finger access to

hazardous parts within the enclosure.

Safety considerations

Basic Module Configuration

1. Connect the input signal to a channel input.

2. On N1000A, click Setup > Modules > Precision

Waveform Analyzer.

3. In the dialog box’s Channels tab, turn on the appropri-

ate channel.

4. In the Clock Recovery tab, select the Input channel.

5. Select the Data Rate.

6. Configure the Clock Recovery Loop Bandwidth and

Peaking settings, as appropriate.

7. Click the Lock button.

8. On the Precision Timebase tab, click Enable Precision

Timebase.

9. For additional information, consult the N1000A help

system.

Clock tab

Step 3. Turn on channel in Channels tab

Step 4. Select Channel Source

Step 8. Enable Precision Timebase

Step 5.

Select Data Rate

Step 6.

Loop Characteristics

Step 7.

Click Lock button

Select loop bandwidth (LBW)

Indice

Altri manuali Keysight Technologies Strumento di misura

Keysight Technologies

Keysight Technologies M9393A Istruzioni operative

Keysight Technologies

Keysight Technologies U5855A Manuale utente

Keysight Technologies

Keysight Technologies X Series Manuale del proprietario

Keysight Technologies

Keysight Technologies N4373D Manuale utente

Keysight Technologies

Keysight Technologies U4205A Manuale utente

Keysight Technologies

Keysight Technologies U1401B Manuale utente

Keysight Technologies

Keysight Technologies MY53280000 Guida rapida

Keysight Technologies

Keysight Technologies N5247B Manuale utente

Keysight Technologies

Keysight Technologies N5244BU-679 Manuale utente

Keysight Technologies

Keysight Technologies 34136A Manuale utente

Keysight Technologies

Keysight Technologies E5260 Series Manuale utente

Keysight Technologies

Keysight Technologies N9040B Manuale di installazione e funzionamento

Keysight Technologies

Keysight Technologies 86120B Manuale utente

Keysight Technologies

Keysight Technologies 6811C Istruzioni operative

Keysight Technologies

Keysight Technologies UXA N9040B Manuale utente

Keysight Technologies

Keysight Technologies C Series Manuale utente

Keysight Technologies

Keysight Technologies P Series Istruzioni operative

Keysight Technologies

Keysight Technologies E8364-60108 Manuale di installazione e funzionamento

Keysight Technologies

Keysight Technologies Agilent Technologies PXI Express M9202A Guida utente

Keysight Technologies

Keysight Technologies M8131A Manuale utente

Keysight Technologies

Keysight Technologies N2893A Manuale utente

Keysight Technologies

Keysight Technologies ENA Series Guida rapida

Keysight Technologies

Keysight Technologies X-Series Guida rapida

Keysight Technologies

Keysight Technologies P50 B Series Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente