Multitech MultiModem iSMS SF100-G Manuale utente

SMSFinder™

Turnkey SMS Server

Model SF100-G

Quick Start Guide

SMSFinder™

Turnkey SMS Server

SF100-G

Quick Start Guide

82100360L Rev. A

may not be reproduced, in whole or in part, without prior written permission from

Multi-Tech Systems, Inc. Multi-Tech Systems, Inc. makes no representations or

warranty with respect to the contents hereof and specifically disclaims any implied

warranties of merchantability or fitness for any particular purpose. Furthermore,

Multi-Tech Systems, Inc. reserves the right to revise this publication and to make

changes from time to time in the content hereof without obligation of Multi-Tech

Systems, Inc. to notify any person or organization of such revisions or changes.

Revision Date Description

A 01/25/08 Initial release.

Trademarks

Multi-Tech and the Multi-Tech logo are registered trademarks of Multi-Tech

Systems, Inc. SMSFinder is a trademark of Multi-Tech Systems, Inc.

World Headquarters

Multi-Tech Systems, Inc.

2205 Woodale Drive

Mounds View, Minnesota 55112 U.S.A.

(763) 785-3500 or (800) 328-9717

U.S. Fax (763) 785-9874

www.multitech.com

Technical Support

Country Email Phone

Europe, Middle East, Africa [email protected] +44 118 959 7774

U.S., Canada, all others suppor[email protected] 800-972-2439 or

763-717-5863

SMSFinder

Introduction

This guide shows you how to set up your SMSFinder and how to send a

short message. For detailed information, product specifications, and

more, see the User Guide, available on the SMSFinder CD and the

Multi-Tech Web site.

Safety Warnings

Ethernet Port Caution

The Ethernet port is not designed to be connected to a Public

Telecommunications Network.

Handling Precautions

All devices must be handled with certain precautions to avoid damage

due to the accumulation of static charge. Although input protection

circuitry has been incorporated into the devices to minimize the effect of

this static build up, proper precautions should be taken to avoid

exposure to electrostatic discharge during handling and mounting.

Caution: Maintain a separation distance of at least 20 cm (8

inches) between the transmitter’s antenna and the body of the

user or nearby persons. The modem is not designed for, nor

intended to be, used in applications within 20 cm (8 inches) of the

body of the user.

Ship Kit Contents

The SMSFinder ship kit contains the following items:

•One SMSFinder

•Power Supply

•RJ-45 Ethernet Cable

•Cellular Antenna (not included with all models)

•A set of four self-adhesive plastic feet

•The Quick Start Guide

•One SMSFinder CD which contains the SMSFinder documentation

in Acrobat format and a link to the Adobe Web site from which you

can download Acrobat Reader.

Multi-Tech Systems, Inc. Quick Start Guide

Cabling Your SMSFinder

1. Turn the power off on the PCs and the SMSFinder.

2. Plug one end of a RJ-45 cable into the LAN port on the SMSFinder

and the other end into the Ethernet port on a network-connected

PC.

3. Connect the provided power supply cable to the 9 volt power port

on the back of the SMSFinder, and plug the other end into an AC

power outlet.

4. Attach the cellular antenna.

•Be sure to locate this appliance where there is wireless

coverage.

•The antenna must be attached in order for the SMSFinder to be

operational.

SMSFinder

Front Panel

Front Panel LEDs and Other Features

LEDs Description

Power Lights when power is being supplied to the SMSFinder.

Status When functioning normally, the LED blinks. The LED is a

solid light when the SMSFinder is booting up, saving the

configuration, restarting, or updating the firmware.

LAN

10/100 Lights when a successful connection to the 100BaseT LAN

is established. Off when connected at 10BaseT.

LAN

LNK/ACT Lights when the LAN port has a valid Ethernet connection.

Blinks when it is receiving or transmitting data.

Modem TD Transmit Data. This LED blinks when the modem is

transmitting data to your wireless carrier.

RD Receive Data. This LED blinks when the modem is

receiving data from your wireless carrier.

CD Carrier Detect. This LED lights when the modem

detects a valid carrier signal from a wireless carrier.

TR (Data) Terminal Ready. This LED lights when the

modem is trying to establish a wireless connection.

LS Link Status. This LED flashes when the network

registration is OK.

If the network registration is invalid, the LED will be

On/Off.

Signal Indicates the wireless signal strength. See the Signal

Strength Chart on the next page.

SIM Location of the SIM card.

Multi-Tech Systems, Inc. Quick Start Guide

Install the SIM Card

A SIM (Subscriber Identity Module) card is required in order for the

SMSFinder to operate on a GPRS network. To install the SIM card:

1. Use a small screwdriver to remove the screw closest to the outside

edge of the SMSFinder. Then swing the SIM slot cover up and over

to the left.

2. Insert the SIM card into the SIM card slot. The following graphic

illustrates the correct SIM card orientation.

Establish a TCP/IP Connection

The following directions establish a TCP/IP connection at the

workstation so the PC can communicate with the SMSFinder. The

following directions were written using a Windows 2000+ / XP operating

system.

Setting a Fixed IP Address

1. Make the SMSFinder connections as described on the previous two

pages.

2. Click Start | Settings | Control Panel. Double-click the Network

Connections icon.

3. The Network Connections screen displays. Right-click Local

Area Connection and choose Properties from the drop down list.

SMSFinder

4. The Local Area Connection Properties dialog box displays.

•Select Internet Protocol (TCP/IP).

•Click the Properties button. The Internet Protocol (TCP/IP)

Properties screen displays.

Multi-Tech Systems, Inc. Quick Start Guide

5. On the Internet Protocol (TCP/IP) Properties screen complete the

following:

Important: If this screen opens and displays your current IP

configuration, we suggest you record this information for future

reference (i.e., after the SMSFinder is configured, you may wish to

return this PC to its original settings).

•To set a Fixed IP Address for the workstation, select Use the

following IP address.

∗Enter the workstation IP Address. Example: 192.168.2.x.

Note: The xin the address stands for numbers 101 and up.

∗Enter the workstation Subnet Mask. Example: 255.255.255.0

∗Enter the workstation Default Gateway. Ex: 192.168.2.2

Note: The workstation settings must be in the same subnet

range as the SMSFinder.

The default factory settings for the SMSFinder are:

IP Address: 192.168.2.1; Subnet Mask: 255.255.255.0;

Default Gateway: 192.168.2.2

•Select Use the following DNS server addresses.

∗Enter the IP Address of the Preferred DNS Server. Ex:

205.171.3.65

∗Click OK.

•Close the Local Area Properties screen by clicking OK.

•Close the Control Panel.

•Repeat these steps for each PC on your network.

SMSFinder

Obtain and Activate a Wireless

Account

Before you can use the cellular feature, you must obtain a wireless

account through a service provider and then activate the account.

Please see the wireless account Activation Notices located on the

SMSFinder CD. Choose the one for your wireless network provider and

follow the directions to activate your account.

Important Note About Service Provider Fees

Your provider will charge you for your data usage. Please check with

your provider to make sure you are aware of the charges.

If you plan to use the router for large amounts of data transfers, Multi-

Tech recommends an unlimited data plan with your account. Multi-Tech

will not be responsible for any charges relating to your cellular bill.

Direct Communication to the Cellular Modem

You may want to communicate directly to the cellular modem to activate

the modem, verify network registration, and/or troubleshooting your

connection. To do this:

1. Open a PC's command window by clicking the Start button and

selecting Run.

2. Type CMD to open the command window. Click OK.

3. When the command window opens, type IPCONFIG.

4. Type Telnet 192.168.2.1 5000 (Note: 5000 is the port number).

AT commands can be used to check network registration status. See the

User Guide.

See the GPRS AT Commands Reference Guide and the GPRS-F4

Reference Guide for AT commands.

Multi-Tech Systems, Inc. Quick Start Guide

Start the SMSFinder

Open a Web Browser

1. Be sure that the SMSFinder is cabled and that the power is

connected.

2. Then open a Web browser.

3. Type the default gateway address line: http://192.168.2.1

4. Press Enter.

The Login screen for the SMSFinder Web Interface displays.

•Type admin (admin is the default user name) in the user name

box.

•Type admin in the password box.

•Click Login.

Note: The User name and Password entries are case-sensitive

(both must be typed in lower-case). The password can be up to

12 characters. Later, you will want to change the password from

the default (admin) to something else (see the User Guide). If

Windows displays the AutoComplete screen, you may want to

click No to tell Windows OS to not remember the password for

security reasons.

Altri manuali per MultiModem iSMS SF100-G

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Multitech Server

Multitech

Multitech MTASR3-200 Manuale utente

Multitech

Multitech FaxFinder FF440 Manuale di servizio

Multitech

Multitech MultiConnect WF MTS2WFA Manuale utente

Multitech

Multitech FaxFinder FF240-IP Manuale di servizio

Multitech

Multitech FaxFinder FF-120 Manuale utente

Multitech

Multitech TalkAnytime TA2410 Manuale utente

Multitech

Multitech TalkAnytime TA410 Manuale utente

Multitech

Multitech MA6 Manuale utente

Multitech

Multitech FaxFinder FF100 Manuale utente

Multitech

Multitech FaxFinder FF-420 Manuale utente

Multitech

Multitech RASFinder RF300E Manuale utente

Multitech

Multitech FaxFinder FF200 Manuale utente

Multitech

Multitech ProxyServer MTPSR2-201 Manuale utente

Multitech

Multitech CommPlete RAS96 Manuale utente

Multitech

Multitech FaxFinder FF130 Manuale di servizio

Multitech

Multitech FaxFinder FF110 Manuale utente

Multitech

Multitech FaxFinder FF110 Manuale utente

Multitech

Multitech FaxFinder FF130 Manuale utente

Multitech

Multitech MultiConnect SE MTS2EA Manuale utente

Multitech

Multitech FaxFinder FF130 Manuale utente

Multitech

Multitech ProxyServer MTPSR3-200 Manuale utente

Multitech

Multitech FaxFinder FF240-IP Manuale utente

Multitech

Multitech SocketWireless MT800SWM Manuale utente

Multitech

Multitech MA100-1M Manuale utente

Manuali Server popolari di altre marche

HP AlphaServer ES47 Manuale utente

Dell

Dell PowerEdge R410 Manuale utente

PowerNAS

PowerNAS CMA Manuale utente

Supero

Supero FatTwin F617R3-FT Manuale utente

MSI

MSI P1-109N-L70 Manuale utente

Dell

Dell PowerEdge XE9640 Manuale

Dell

Dell PS4100 Istruzioni di montaggio

EtroVISION

EtroVISION EV3151 Manuale utente

NEC

NEC Express5800/T110j Manuale utente

HP ProLiant Gen9 Manuale utente

Compaq

Compaq ProLiant 3000 Manuale

Dell

Dell PowerEdge 3YPMN Manuale utente

iRobo

iRobo IPC2U Manuale utente

Nortel

Nortel 1000 Con?guration guide Manuale utente

Asus

Asus AP7500 Manuale operativo e di manutenzione

Avid Technology

Avid Technology AirSpeed 5000 Manuale utente

HP Integrity rx2600 Guida all'installazione

Milestone

Milestone Husky IVO 350T Manuale utente