Optika Italy B-150D Series Manuale utente

Model

B-150D-MRPL

B-150D-BRPL

B-150D Series

INSTRUCTION MANUAL

Ver. 2.1 2020

Page 2

1. Warning 3

2. Symbols and conventions 3

3. Safety Information 3

4. Intended use 3

5. Overview 4

5.1 B-150D-MRPL 4

5.2 B-150D-BRPL 5

6. Unpacking 6

7. Assembling 6

7.1 B-150D-MRPL 6

7.2 B-150D-BRPL 7

7.3 Assembling procedure 8

7.4 Polarizing set (optional) 9

8. Use of the microscope 10

8.1 Light intensity adjustment 10

8.2 Coarse focus tension adjustment 10

8.3 Stage 10

8.4 Adjust the interpupillary distance 10

8.5 Diopter adjustment 11

8.6 Use of oil immersion objective 11

8.7 Aperture diaphragm 12

8.8 Use with rechargeable batteries 12

8.9 Use of the polarizer (optional) 12

9. Use of software and digital head 13

10. Maintenance 14

11. Troubleshooting 15

Equipment disposal 16

Summary

Page 3

1. Warning

This microscope is a scientic precision instrument designed to last for many years with a minimum of

maintenance. It is built to high optical and mechanical standards and to withstand daily use. We remind you

that this manual contains important information on safety and maintenance, and that it must therefore be made

accessible to the instrument users. We decline any responsibility deriving from incorrect instrument use uses

that does not comply with this manual.

2. Symbols and conventions

The following chart is an illustrated glossary of the symbols that are used in this manual.

CAUTION

This symbol indicates a potential risk and alerts you to proceed with caution.

ELECTRICAL SHOCK

This symbol indicates a risk of electrical shock.

3. Safety Information

Avoiding Electrical Shock

Before plugging in the power supply, make sure that the supplying voltage of your region matches with the

operation voltage of the equipment and that the lamp switch is in o󰀨 position. Users should observe all safety

regulations of the region. The equipment has acquired the CE safety label. However, users have full responsibility

to use this equipment safely. Please follow the guidelines below, and read this manual in its entirety to ensure

safe operation of the unit.

4. Intended use

Standard models

For research and teaching use only. Not intended for any animal or human therapeutic or diagnostic use.

IVD Models

Also for diagnostic use, aimed at obtaining information on the physiological or pathological situation of the

subject.

Page 4

COARSE

FOCUS KNOB

FINE FOCUS KNOB

EYEPIECE

OBSERVATION

HEAD

MAIN SWITCH

/ INTENSITY

ADJUSTMENT DIAL

CONDENSER

STAGE

LED CHARGE

INDICATOR

NOSEPIECE

OBJECTIVES

TENSION

ADJUSTMENT

COLLAR

SLIDE HOLDER

X/Y MOVEMENT

KNOBS

5. Overview

5.1 B-150D-MRPL

Page 5

COARSE

FOCUS KNOB

FINE FOCUS KNOB

EYEPIECES

OBSERVATION

HEAD

MAIN SWITCH

/ INTENSITY

ADJUSTMENT DIAL

CONDENSER

STAGE

LED CHARGE

INDICATOR

NOSEPIECE

OBJECTIVES

TENSION

ADJUSTMENT

COLLAR

SLIDE HOLDER

X/Y MOVEMENT

KNOBS

5.2 B-150D-BRPL

Page 6

① Frame

② Monocular observation head

③ Eyepiece

④ Tension adjustment tool

⑤ Objectives (4X / 10X / 40X)

⑥ Dust cover

⑦ Green lter

⑧ Frosted lter

⑨ Power supply

⑩ USB cable

③

④

⑤

⑥

⑦⑧

①

②⑨

⑩

6. Unpacking

The microscope is housed in a moulded Styrofoam container. Remove the tape from the edge of the container

and lift the top half of the container. Take some care to avoid that the optical items (objectives and eyepieces)

fall out and get damaged. Using both hands (one around the arm and one around the base), lift the microscope

from the container and put it on a stable desk.

Do not touch with bare hands optical surfaces such as lenses, lters or glasses. Traces of grease or other

residuals may deteriorate the nal image quality and corrode the optics surface in a short time.

7. Assembling

Once opened the box, the microscope parts are the following:

7.1 B-150D-MRPL

Page 7

7.2 B-150D-BRPL

③

④

⑤

⑥⑦⑧

①

②

① Frame

② Binocular observation head

③ Eyepieces

④ Tension adjustment tool

⑤ Objectives (4X / 10X / 40X / 100X)

⑥ Dust cover

⑦ Green lter

⑧ Frosted lter

⑨ Power supply

⑩ USB cable

⑪Immersion oil

⑨

⑩

⑪

Page 8

FFig. 2ig. 2

FFig. 3ig. 3

FFig. 1ig. 1

①

7.3 Assembling procedure

1. Remove the dust cap from the microscope frame

and from the bottom of the observation head.

2. Insert the optical head above the stand and tight-

en the screw ①. (Fig. 1)

• Hold the head with one hand during the

locking in order to avoid that the head falls.

3. Insert one end of the USB cable into the connec-

tor on the back of the optical head and the other

end into one of the USB ports on your computer.

4. Insert both eyepieces into the tubes of the optical

head. (Fig. 2)

• For model B-150D-MRPL: only one eyepiece

is used as this model is monocular.

5. Insert the power supply jack in the socket placed

at the rear side of the microscope. (Fig. 3)

Page 9

FFig. 6ig. 6

③

FFig. 4ig. 4

①

FFig. 5ig. 5

②

7.4 Polarizing set (optional)

1. Place the polarizer on the light exit ①at the base

of the microscope. (Fig. 4)

2. Loosen the head xing knob ② and remove the

head from the microscope frame. (Fig. 5)

3. Insert the analyser into the hole inside the frame

③. (Fig. 6)

4. Put back the head into its original position and

lock the xing knob.

Page 10

FFig. 7ig. 7

①

FFig. 8ig. 8

②

FFig. 10ig. 10

④

FFig. 9ig. 9

③

8. Use of the microscope

8.1 Light intensity adjustment

Operate on the light intensity adjustment dial ①to

turn ON / OFF the microscope and to increase / de-

crease the illumination voltage. (Fig. 7)

8.2 Coarse focus tension adjustment

• Adjust the tension using the provided tool.

The coarse knob tension is pre-setted in the factory.

1. To modify the tension according to personal’s

needs, rotate the ring ② using the provided tool

(Fig. 8).

• Clockwise rotation increases the tension.

• If the tension is too loose, the stage could go

lower by itself or the focus easily lost after ne

adjustment. In this case, rotate the knob in order

to increase the tension.

8.3 Stage

Stage accepts standard slides 26 x 76 mm, thickness

1,2 mm with coverslide 0,17mm. (Fig. 9)

1. Open the spring arm of the slide holder ③ and

place the slide from the front on the stage.

2. Gently release the spring arm of the slide holder.

• A sudden release of the spring arm could

cause the falling of the slide.

8.4 Adjust the interpupillary distance

Only B-150D-BRPL

Hold the right and left parts of the observation head

using both hands and adjust the interpupillary dis-

tance by turning the two parts until one circle of light

can be seen. (Fig. 10)

• The graduation on the interpupillary distance in-

dicator ④, pointed by the spot “.” on the eyepiece

holder, shows the distance between the opera-

tor’s eyes.

The range of the interpupillary distance is 48- 75 mm.

Altri manuali per B-150D Series

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali Optika Italy Microscopio

Optika Italy

Optika Italy B-510 Series Manuale utente

Optika Italy

Optika Italy ECOVISION Series Manuale utente

Optika Italy

Optika Italy B-382PL-ALC Manuale utente

Optika Italy

Optika Italy B-60 Series Manuale utente

Optika Italy

Optika Italy B-290 Series Manuale utente

Optika Italy

Optika Italy B-510 Series Manuale utente

Optika Italy

Optika Italy IM-5FLD Manuale utente

Optika Italy

Optika Italy B-190TB Series Manuale utente

Optika Italy

Optika Italy SLX Series Manuale utente

Optika Italy

Optika Italy INSPECTION SYSTEMS Series Manuale utente

Optika Italy

Optika Italy CL Series Manuale utente

Optika Italy

Optika Italy B-510 Series Manuale utente

Optika Italy

Optika Italy IM Series Manuale utente

Optika Italy

Optika Italy B-510 Series Manuale utente

Optika Italy

Optika Italy OPTIKAM EC2 Manuale utente

Optika Italy

Optika Italy B-380 Series Manuale utente

Optika Italy

Optika Italy SZR Series Manuale utente

Optika Italy

Optika Italy IM-5 Series Manuale utente

Optika Italy

Optika Italy B-1000FL-HBO Manuale utente

Optika Italy

Optika Italy IM Series Manuale utente

Optika Italy

Optika Italy B-150 Series Manuale utente

Optika Italy

Optika Italy B-380 Series Manuale utente

Optika Italy

Optika Italy IM-3 Series Manuale utente

Optika Italy

Optika Italy ACCESSORIES Series Manuale utente

Manuali Microscopio popolari di altre marche

Thermo Scientific

Thermo Scientific Nicolet iN10 Guida

National

National DC3-163 Manuale utente

KERN Optics

KERN Optics OPE-1 Manuale utente

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Manuale utente

Prior

Prior Lux POL Manuale utente

Opitec

Opitec Smartscoop 115615 Manuale utente

KERN

KERN OPO-1 Manuale utente

Topcon

Topcon SP-1P Manuale utente

Motic

Motic PA43 Manuale utente

Leica

Leica DVM5000 Guida utente

MshOt

MshOt MZ62 Manuale utente

KERN Optics

KERN Optics OZR-5 Manuale utente

VWR

VWR VisiScope 384 Series Manuale utente

Nikon

Nikon ECLIPSE E200 POL Manuale utente

Leica

Leica DI C800 Manuale

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manuale utente

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manuale utente

Olympus

Olympus SZ61 Manuale utente