Rexing DT2 Manuale utente

User Manual

DT2

The information in this manual is subject to change without notice.

www.rexingusa.com

& Choose Your

FREE Gift!

Scan The QR To Activate &

Select Your Free Gift

Activate within 30 days of purchase to

claim your free gift and extend your

limited 12-month warranty to 18 months.

Activate Your

18-Month

Warranty

https://www.rexingusa.com/productreg/

We hope you love your new products as much as we do. If you need

assistance, or have any suggestions to improve it, please contact us.

Our support team will respond to you as soon as possible.

Always a surprise with Rexing

• https://www.facebook.com/rexingusa/

• https://www.instagram.com/rexingdashcam/

• https://www.rexingusa.com/support/registration/

Overview

Thank you for choosing REXING!

Check us out here.

Facebook Instagram Site Product Support

[email protected]

(877) 740-8004

User Manual

DT2

Theinformation in this manual is subject to change without notice.

RexingAll Rights Reserved

www.rexingusa.com

Package Contents

1. Rexing DT2 Dash Cam

2. Rear camera with rear camera cable

3. Type-C Data Cable (for transferring files only)

4. 3M Adhesive

5. Cable Clips

6. Car Charger

7. Cable Management Tool

8. Users Manual

9. 32GB SD Card

10. Warning Sticker

11. Electrostatic Sticker

1 2 3

4 9 10

7 8 11

Double Coated Tissue

DoubleCoatedTissue

Paste the electrostatic film

on the front windshield

Paste the bracket into this

circular area

Camera Overview

3“ LCD Screen

Front Camera

Reset

Button

Rear

Camera

Port

USB-C

Charging Port

OK/RECORD

/ POWER

Button

MENU/

MODE/LOCK

Button

DOWN/

MUTE

Button

UP/

TOGGLE

VIEW

Button

Micro SD

Card Slot

1. Recording Mode

2. Recording (On)

3. WDR Mode (On)

4. G-Sensor Sensitivity Level

5. Recording Time (Current Clip)

6. Video Resolution

7. Parking Mode (On)***

8. Memory Card（Inserted)

9. Battery Charging

10. Plate Number

11. Time

12. Current Date Time

13. MIC (ON)

14. Exposure Value

15. Loop Recording Time Interval

*** Please connect a Smart Hardwire Kit or an Intelligent Hardwire Kit to activate the

parking monitor feature.

AABCDEFG

01/31/2023 03:05:57

1080 FHD

00:00:06

2 3 4

13 12 11 10

Get Started

Step 1

Installing Adhesive Mount

Place the 3M adhesive on the mount plate and properly orient the mount

piece to the roof and hood line of the vehicle.

Step 2

Installing the Electrostatic Stickers

2.1 Prepare Your Windshield

Thoroughly cleanse your windshield with either water or alcohol. Follow

this by wiping it dry using a clean, dry cloth to ensure a spotless surface.

2.2 Position the Sticker

Next, carefully peel off the protective film from the electrostatic sticker.

Attach the sticker to the windshield, ideally behind the rear-view mirror.

This position is recommended to avoid obstructing your view while

you're on the road.

Elecrostatic

sticker

Be sure to handle each component with care and follow the

guidelines in their respective order. This is to ensure optimal

performance of the sticker, the mount, and the camera.

2.3 Secure the Mount and Camera

Now, remove the 3M tape from

the mount. Once done, you can

proceed to fix both the mount

and camera onto the previously

positioned electrostatic stickers.

Note:

Step 3

Mount the Rear Camera

Mount the rear camera as shown below. Use the included rear camera

cable to connect the rear camera to the front camera.

Rear

camera

wiring

instructions

Plug the rear

camera into

the rear

camera port

DoubleCoatedTissue

Step 4

Insert the Memory Card

The Rexing DT2 accepts Class 10/ UHS-1 or higher Micro SD memory cards

up to 128GB. You will need to insert a memory card before recording.

Before inserting or removing a memory card, ensure you've powered down

the device.

Gently push the memory card in until you hear a click, and allow the spring

release to push the card out.

Hold the OK

button for

about 3

seconds to

turn the

power off first

Step 5

Power on the Camera and Format the Memory Card

Power the camera by connecting the charger to the car cigarette

lighter and the camera.

To ensure the DT2 records to your memory card properly and without error,

we strongly recommend you to format the card within the camera when

you're using the dash cam for the first time.

Note:

Always remember backup important data stored on the memory card

before formatting.

The camera will shut down after 3 seconds when it's disconnect from the

power source and it should begin recording automatically the next time it is

powered on.

Plug the

Type-C

Connector to

the dash cam

Route the

power

cable

Plug the

charger into

the power

outlet or a

cigarette

lighter

Indice

Manuali Telecamera da cruscotto popolari di altre marche

Cansonic

Cansonic UltraDuo Z2 Manuale utente

Gazer

Gazer F720 Manuale utente

HP f500g Manuale utente

Xblitz

Xblitz TANGO 4K Manuale utente

Maka Technologies

Maka Technologies Marbella MXPro Manuale utente

NESA

NESA NRC-80DLM Istruzioni per l'installazione e il funzionamento

Kaiser Baas

Kaiser Baas R20 Manuale utente

Boyo

Boyo VTM43TC Manuale utente

Minolta

Minolta MNCD37 Manuale utente

Thinkware

Thinkware FA10 Manuale utente

Momento

Momento MD-5200 Manuale utente

BlackVue

BlackVue DR590X-1CH Manuale utente

HP F300 Manuale utente

CammSys

CammSys BlackSys BH-300 Manuale utente

Snooper

Snooper DVR-2HD Manuale utente

Lukas

Lukas Q900 Manuale utente

RVS

RVS 450C Manuale utente

BlackVue

BlackVue 750G PRO Guida di riferimento