Rexing V1 Manuale utente

V1 Basic

Quick Start Guide

クイックスタートガイド

Table of Contents

English

Overview

What’s in the Box

Camera Overview

Installation

Basic Operation

日本語

概説

本製品の同梱物

カメラの概説

画面のアイコン

基本操作

page

1. Overview

Thank you for choosing REXING! We hope you love your

new product as much as we do.

If you need assistance, or have any suggestions to improve it,

please contact us. You can reach us via [email protected] or

call us at (203) 800-4466. Our support team will respond you as

soon as possible.

Always a surprise in Rexing. Check us out here.

https://www.facebook.com/rexingusa/

https://www.instagram.com/rexingdashcam/

https://www.rexingusa.com/support/registration/

1. Rexing V1 Basic Dash Cam

2. Car Charger

3. Dash Cam Mount Plate & 3M Adhesive

4. Mini-USB Cable

5. Cable Management Tool

6. Cable Clips©

7. V1 Basic Quick Start Guide

8. Safety Guide

5. 6. 7. 8.

2. 3. 4.

Facebook Instagram Site

2. What’s in the box

3. Camera Overview

1. Micro SD Card Slot

2. Power Button

3. Reset Button

4. Menu Button

5. Mode Button

6. REC (Record) Button *

7. OK (Conrm) Button **

8. MIC (Microphone) Button ***

9. Screen Button

10. Mini-USB Port

11. GPS Logger Port

12. Rear Camera Port (Not Support)

13. Lens Angle Adjustment

* The Camera is recording when the LED is ashing red.

** The Camera is recording when the LED is ashing red. The device charging

or powered on when the LED is solid blue.

*** The device is charging or powered on when the LED is solid blue.

10.

11.

5. 6. 8.

12.

13.

4. Installation

Step 1: Install the Dash Cam

Place the 3M adhesive on the mount and properly orient

the mount square to the roof and hood line of the

vehicle. Important! Ensure the T-interlock on the Mount

is oriented in the correct direction (as shown below).

Firmly press the mount onto the windshield. Wait at least

20 minutes before mounting the camera.

Orientation mount as shown

Step 2: Insert the Memory Card

The Rexing V1 Basic accepts [Class 10/ UHS-1 or higher]

Micro SD memory cards up to 256 GB. You will need to insert

a memory card before you can begin recording. Before

inserting or removing a memory card, first ensure

you’ve powered down the device.

Gently push the memory card in until you hear a click, and allow

the spring release to push the card out.

Step 3: Power the Camera and Format the

Memory Card

Power the camera by connecting the charger to the car cigarette

lighter and camera.

To ensure the V1 Basic records to your memory card

properly and without error. Before you start using a new

memory card, you must format the card within the

camera using the format function. Always backup

important data stored on the memory card before formatting.

To format the memory card, make sure you have inserted

your memory card, then turn on the device by connecting to

a power source. Press REC to stop recording. Then press the

MENU button twice to enter the System Setup Menu. Use the

REC and MIC buttons and go to the Format setting. Press the

OK Button to con irm the selection.

Press the Power

button to turn

the power o

You may now disconnect from power. The camera will shut

down after 3 seconds. The camera should begin recording

automaticially the next time it is powered on.

Press the Menu

button twice

Press the OK

button to conrm

formatting

the card

1110

Step 4: Installing the Camera onto the Windshield

Place the camera on the mount and carefully route the power

cable around the windscreen and tuck in under the trim.

Plug the Car Charger Cable into a 12V DC power outlet or the

car cigarette lighter.

Connect car charger to the camera. The camera will auto-start

recording once powered on.

Plug Mini 5 pin

Connector to

the Dash Cam

Route power

cable to the

Dash Cam

Plug charger into

power outlet or

cigarette lighter

5. Basic Operation

Device Power

The device is automatically powered on when plugged into a

12V accessory socket or cigarette lighter and receives a charge

(i.e.: the vehicle is started.)

To turn the device on manually, press and hold the POWER

button until the welcome screen appears.

The camera will autoatically start recording when powered on.

Press an hold the POWER button

to turn the device on manually

1312

Menu Settings

Power the camera on. If the camear is recording, pres the REC

button to stop recording. Press the MODE button and toggle to

the desired mode.

Press the MENU button once to enter the settings

menu for a Mode. Press the MENU button twice to enter the

System Settings.

System icon

Video Mode icon

Press the Menu button to

select the desired setting

Press the Mode button and toggle

to the desired Mode

Video Recording

The camera will automatically

start recording when the

device receives a charge. The

LED lights and the red dot

will blink when the device

is recording. Press the REC

button to stop recording.

The camera automatically start

recording when powered on

Playback mode

Control playback with these buttons

Video Playback

Playback of videos can

be done on the device or

a computer. Also, if you

have purchased a Rexing

GPS Logger you may play

back the recordings in

a specialized application.

1514

During playback use the OK (pause), MIC (fast forward) and REC

(rewind) buttons to control the video playback.

To playback a video on the computer either use an SD card

adapter or connect the device to the computer directly using

the USB to Mini B 5pin male cable.

To playback a video using

an SD card adapter,

remove the memory card and

insert it into an SD card

adapter. Place the adapter in

the computer.

To playback a video

using USB to Mini B

5pin male cable, connect

the USB to Mini B 5pin Male

Cable to the device and

the USB connector to the

computer.

After the device powers

up, press the OK Button to

select Mass Storage.

On the computer, navigate

to device drive. The videos

are stored at: \CARDV\

MOVIE.

Select the video to playback.

Connect USB

connector to

computer

Select Mass

Storage

Parking Monitor

You can enable the parking monitor function through the

setup option.

To playback a video on

the device, toggle to the

Playback mode. Use the REC

and MIC buttons to toggle to

the desired video. Press the

OK button to play.

1716

GPS Logger

(Need to purchase separately. ASIN: B08CZDXVLJ)

When connected to the camera,

it will record the speed and

location of your vehicle as you

drive.

You can then access this

information while playing back

your recordings using the GPS

Video player (For Windows and

Mac, available at rexingusa.com).

Press the MENU button twice

and enter the System Settings.

Toggle to the GPS Speed Unit

setting and select your preferred

speed unit.

After a GPS signal is found, the

screen icon will turn from blue

to green.

Please visit gpsa.rexingusa.com

to watch a video tutorial.

GPS Signal

(not connected)

GPS Signal

(searching)

GPS Signal

(active)

Taking Photos

To take a photo, stop

video recording and toggle

to the Photo Mode.

Press the OK Button to

take a photo.

To view a photo, stop

video recording and toggle

to the Playback Mode.

Press the REC and MIC

Buttons to toggle through

your photos.

To delete a photo, stop

video recording and

toggle to the Playback

Mode and toggle through

the videos and photos to

the one you want to

delete.

Press the MENU button

once and toggle to the

Delete option.

Press the OK Button and

select Delete Current or

Delete All.

Toggle

to the

Playback

mode and

select a

photo to

view

Toggle to

the Delete

option

Choose

the desired

option

1. 概説

REXINGを選んでいただきありがとうございます！お客様が、私

たちと同様、新しい商品を気に入っていただけることを願ってい

ます。サポートが必要な場合、または改善のための提案がありま

したら、是非、ご連絡ください。[email protected]に電子

メールを送ることができます。当社のサポートチームができるだけ

早くお返事いたします。

常にREXINGでサプライズを。こちらから最新情報をチェックくだ

さい。

https://www.facebook.com/rexingusa/

https://www.instagram.com/rexingdashcam/

https://www.rexingusa.com/support/registration/

Facebook Instagram ホームページ

1. Rexing V1 Basicドライブレコーダー

2. 車載充電器

3. ドライブレコーダーマウントプレートと3M接着シール

4. ミニUSBケーブル

5. ケーブル管理ツール

6. ケーブルクリップ

7. V1 Basic クイックスタートガイド

8. 安全ガイド

2. 本製品の同梱物

5. 6. 7. 8.

2. 3. 4.

Altri manuali per V1

Indice

Altri manuali Rexing Telecamera da cruscotto

Manuali Telecamera da cruscotto popolari di altre marche

Cansonic

Cansonic UltraDuo Z2 Manuale utente

Gazer

Gazer F720 Manuale utente

HP f500g Manuale utente

Xblitz

Xblitz TANGO 4K Manuale utente

Maka Technologies

Maka Technologies Marbella MXPro Manuale utente

NESA

NESA NRC-80DLM Istruzioni per l'installazione e il funzionamento

Kaiser Baas

Kaiser Baas R20 Manuale utente

Boyo

Boyo VTM43TC Manuale utente

Minolta

Minolta MNCD37 Manuale utente

Thinkware

Thinkware FA10 Manuale utente

Momento

Momento MD-5200 Manuale utente

BlackVue

BlackVue DR590X-1CH Manuale utente

HP F300 Manuale utente

CammSys

CammSys BlackSys BH-300 Manuale utente

Snooper

Snooper DVR-2HD Manuale utente

Lukas

Lukas Q900 Manuale utente

RVS

RVS 450C Manuale utente

BlackVue

BlackVue 750G PRO Guida di riferimento