Rexing V3 Manuale utente
V3
User Manual
The information in this manual is subject to change
without notice.
www.rexingusa.com 06Rev4
32
About This Manual
This device provides high-quality digital recording using Rexing’s
high standards of design, construction and technological
expertise. This user manual describes the device’s functions
and features in detail. Please read this manual before using the
device to ensure safe and proper use. Note that all descriptions
included here are based on the device’s default settings.
• Images and screenshots may dier in appearance from
the actual product. Content may dier from the nal
product or from software provided by service providers
and is subject to change without prior notice.
• For the latest version of this manual, refer to the Rexing
website at www.rexingusa.com.
• Available features and additional services may vary by
device and software.
• Applications and their functions may vary by country,
region, or hardware specications.
• Rexing is not liable for performance issues caused by
applications from any provider other than Rexing.
• Rexing is not liable for performance issues or
incompatibilities caused by failure to install the device
as stated in this manual. Attempting to customize the
installation may cause the device or applications to work
improperly which may result in device malfunctions and
data corruption or loss. These actions are violations of
your Rexing agreement and will void your warranty.
www.rexingusa.com/support/registration/
/rexingusa
@rexingdashcam
• Default applications that come with the device are subject
to updates and possible discontinuation of support without
prior notice. If you have questions about an application
provided with the device, contact an authorized Rexing
Service Center.
54
5. Mode Setup
Video Mode Settings
System Settings
Photo Settings
6. Troubleshooting
Update Firmware
7. Product Specications
8. Warranty & Support
Table of Contents
About This Manual
Table of Contents
1. What’s in the box?
2. Camera Overview
Device Layout
Buttons
Status Icons
3. Getting Started
Installation
Attach the Front Camera to the window mount
Inserting the Memory Card
Formating a Memory Card
Powering the Camera
Formatting the Memory Card
Connect the car charger to the car’s 12V DC outlet
Turning the Device On and O
4. Basic Operation
Auotomatic Recording
Playback
Camera Playback Mode
Computer Playback
GPS Playback
Wi-Fi Connect
page
2
4
6
8
8
9
10
12
12
13
13
15
15
16
17
18
19
19
20
21
22
23
25
26
26
32
35
38
38
40
42
page
76
1. What’s in the box? The items supplied with the device and any available
accessories may vary depending on your region. Appearances
and specications are subject to change without prior notice.
Availability of accessories is subject to change.
All supplied items are designed for use only with this device
and may not be compatible with other devices. Malfunctions
resulting from the use of unapproved accessories are not
covered by the warranty service.
For more information about available accessories, refer to
www.rexingusa.com.
1. Quick Start Guide
2. Safety Guide
3. USB Cable
4. 3M Adhesive Mount
5. Cable Adhesive Spacer
6. Cable Management Tool
7. Rexing V3 Dashboard Camera
8. Car Power Connector (12ft)
8.
1.
3.
2.
4.
5.
6.
7.
98
2. Camera Overview
Device Layout
Buttons
Button Function
Press: Toggle display on or o
Hold: Turn the device on or o manually
Menus: Conrm a selection
Video Mode: Manually lock current recording
Photo Mode: Take photo
Playback Mode: Start / stop playback
Video Mode: Start/stop recording:
Press: Enter menu, cycle through menus or
exit current menu
Hold: Change mode
Menus: Move selection up
Hold (Video or Photo Mode): Enable
Wi-Fi feature
Playback Mode: Decrease or reverse
playback speed / Cycle left through
recordings
Press (Video or Photo Mode): Change front /
rear camera views
Menus: Move selection down
Video Mode: Toggle audio recording
Playback Mode: Increase playback speed /
Cycle right through recordings
RESET
Press and hold for 4 seconds to reset the
device in the event that it operates erratically,
hangs up, or freezes
Indicator Flashing Red – Recording
1. 4 IR Lights
2. Power Button / Screen Toggle Button
3. Menu Button / Mode Button
4. Up Navigation Button / Front and Rear Switch Button
5. Down Navigation Button / Mic Button
6. OK (Conrm) Button / Emergency Lock Button / Record Button
7. Micro SD Card Slot
8. Power / USB Charging Port
9. Reset Button
10. Rear Camera Port (currently not support)
Front
Top
1.
7.
2. 4. 5.3. 6.
Bottom
Side
9.10. 8.
1110
Status Icons
Icon Indication
Video Resolution
Currently Recording (Blinking)
Wide Dynamic Range Enabled
Connected to Power Source
Audio Recording Enabled
Audio Recording Disabled
Video Recording Mode
Playback Mode
Photo Mode
Loop Recording
Memory Card (Inserted)
Exposure
GPS Signal Acquired
GPS Searching for Signal
Current Recording Locked
IT Lights Auto
G-Sensor Level
1312
Step 1: Mount the Front Camera to the Windshield
Make sure that you mount the front camera in a safe,
appropriate location where it won’t obstruct the driver’s view.
Clean your windshield before applying the mount. Wait at least
20 minutes after applying the mount to the windshield before
attaching the camera.
Step 2: Inserting the Memory Card
The V3 accepts Micro SD memory cards (class 10 or higher) with
a maximum capacity of 256GB.
Depending on the memory card manufacturer and type, some
cards may not be compatible with your device. Using an
incompatible card may damage the device or the memory
card or corrupt the data stored on it.
We highly recommend using Micro SD cards that
are specically designated for use with dash cams.
You can nd our recommendations on our website:
www.rexingusa.com/memory-card/.
Note: Before inserting or removing a memory card, rst ensure
you’ve powered down the device.
3. Getting Started
Installation
Video guide can be found at video.rexingusa.com.
Connect the
power cable to
the dash cam
Plug Mini-USB
connector to the
dash cam
Plug charger into
power outlet or
cigarette lighter
1514
Inserting a memory card
1. If the device is powered on, press and hold the POWER
button to power down.
2. Insert the card in the orientation shown.
3. Push the card into the slot, listening for a click sound
signaling the card is securely inserted.
Removing the Memory Card
Before removing a memory card from your V3, you must rst
dismount it for safe removal.
With the device powered down, press down the memory
card until you hear a click. Gently remove your nger (or other
pressing object) to allow the spring release to push the memory
card out of the slot.
Do not remove the memory card while the device is
transferring or accessing information. Doing so can result
in data loss or corruption or damage to the memory card or
device. Rexing is not responsible for losses that result from the
use of damaged memory cards, including the loss of data.
Step 3: Formating a Memory Card
Step 3.1: Powering the Camera
You must always connect the V3 to a power source while
operating the camera. Connect the camera to your vehicle via
the included car charger cable. Connect the larger end of the
car charger cable to your car’s cigarette lighter (12V DC power
outlet), and connect the other Mini-USB end to the Mini-USB
port on the device.
Connecting the charger improperly may cause serious
damage to the device. Any damage caused by misuse is
not covered by the warranty. Use only Rexing-approved
chargers. Using unapproved chargers or cables can damage
the device.
1716
If the device receives an unstable power supply, the screen
may not function properly. If the device is not operating
properly using a Rexing-approved charger, please contact
Step 3.2: Formatting the Memory Card
Before formatting your memory card, always remember
to make backup copies of all important data stored on the
device. The manufacturer’s warranty does not cover loss of
data resulting from user actions.
For best results, format the memory card using the Format
function on your camera.
It’s recommended that you format your memory card after
transferring les to your computer or at least once a month.
Using your camera to format a memory card:
1. Upon turning on the camera, press the OK button to stop
recording.
2. Press the MENU button twice to enter the Setup Menu.
3. Use the UP and DOWN navigation buttons to navigate to
the “Format” option.
4. Press OK to conrm your selection.
5. You will be notied that all data will be deleted. Scroll down
to “OK” and press the OK button to conrm.
6. If you followed the instructions above, you should see a
blue box asking you to please wait while the card is being
formatted. Formatting should only take a moment, and
you will be taken back to the Setup Menu once formatting
is complete.
7. At this point, disconnect from the power source. The
camera will shut down automatically after 3 seconds. The
next time the camera is connected to power, the camera
should start up and begin recording automatically.
Step 4: Connect the car charger to the car’s 12V
DC outlet
Run the cable down from your camera to the 12V cigarette
lighter port of your vehicle. Be sure to connect only Rexing-
approved chargers designed and supplied specically for use
with your device. Using an incompatible charger can cause
serious personal injury or damage to your device.
Press the OK button to conrm
formatting the card
Press the Menu button twice
1918
Step 5: Turning the Device On or Off
Press and hold the POWER button for a few seconds to turn
on the device. A welcome message will be displayed onscreen.
To turn o the device, again press and hold the POWER button
for a few seconds. A goodbye message will be displayed
onscreen.
The V3 will switch on or o automatically if you keep
it connected using the car charger. The camera will
automatically start recording when it is powered on. After
power is diconnected, the device will shut down after 3
seconds.
Note: If your car cigarette lighter provides constant power, the unit
may not turn on or o automatically with the car.
4. Basic Operation
4.1 Automatic Recording
The device will automatically turn on and begin recording once
it receives power, such as when you start your car. The indicator
and the red dot icon on screen will ash while recording.
Display Control
To switch between cameraviews on the LCD display, hold the
UP button. Press the POWER button will turn on or o the LCD
screen, your display setting won’t aect the way recordings are
captured.
Locking Videos
While recording, you can hold the OK button to manually lock
the current video clip. This will ensure that Loop Recording
won’t overwrite the clip when the memory card is full. You can
Press and hold the POWER button
to turn the device on manually
The camera automatically starts recording when it is powered on
Altri manuali per V3
1
Indice
Altri manuali Rexing Telecamera da cruscotto
Rexing
Rexing V1 Manuale utente
Rexing
Rexing V1 Max Manuale utente
Rexing
Rexing MTC1 Manuale utente
Rexing
Rexing V5 Manuale utente
Rexing
Rexing S1 Manuale utente
Rexing
Rexing V5 Plus Manuale utente
Rexing
Rexing V33 Plus Manuale utente
Rexing
Rexing V2 Manuale utente
Rexing
Rexing M2 Manuale utente
Rexing
Rexing V1PGW-4K Manuale utente
Rexing
Rexing S1 Pro Manuale utente
Rexing
Rexing R4 Manuale utente
Rexing
Rexing V5C Manuale utente
Rexing
Rexing V2 PRO Manuale utente
Rexing
Rexing V3 Manuale utente
Rexing
Rexing V1P Pro Manuale utente
Rexing
Rexing R1 Manuale utente
Rexing
Rexing M1 Manuale utente
Rexing
Rexing V1P Gen3 Manuale utente
Rexing
Rexing V33 Plus Manuale utente
