Rexing V1PGW-4K Manuale utente

User Manual

V1PGW-4K

The information in this manual is subject to change without notice.

www.rexingusa.com

We hope you love your new products as much as we do. If you need any

assistance, or have any suggestions to help us improve, please contact us.

Our support team will respond to you as soon as possible.

Always a surprise in Rexing.

•https://www.facebook.com/rexingusa/

•https://www.instagram.com/rexingdashcam/

•https://www.rexingusa.com/support/registration/

•https://www.rexingusa.com/support/product-support/

About Us

Thank you for choosing REXING!

Check us out here

Facebook Instagram Site Product Support

[email protected]

(877) 740-8004

User Manual

Theinformation in this manual is subject to change without notice.

RexingAll Rights Reserved

www.rexingusa.com

Package Contents

1. Rexing V1PGW-4K Dash Cam

2. Rear camera with rear camera cable

3. Mini-USB Cable

4. Mount Plate & 3M Adhesive

5. Cable Clips

6. Car Charger

7. Cable Management Tool

8. Safety Guide

9. User Manual

123

4 7 98

Safety Guide

安全ガイドwww.rexingusa.com

Double Coated Tissue

REC MIC

V1PGW-4K

Camera Overview

1. Micro SD Card Slot

2. Power Button

3. Reset Button

4. Menu Button

5. Mode Button

6. REC (Record) Button

USB

REC MIC

5 6 7 8 9

7. OK (Confirm) Button

8. MIC (Microphone) Button

9. Screen Button

10. Mini-USB Power Port

11. Rear Camera Port

12. Lens Angle Adjustment Dial

1. Recording Mode

2. Recording (On)

3. WDR Mode (On)

4. G-Sensor Sensitivity Level

5. Recording Time (Current Clip)

6. Video Resolution

7. Parking Mode (On)***

8. GPS Signal (not connected)

9. Memory Card (Inserted)

10. Time (24H)

11. Current Date Time

12. MIC (Off)

13. Exposure Value

14. Loop Recording Time Interval

15. GPS Signal (connected)

16. Battery Charging

17. Plate Number

18. MIC (On)

*** Please connect a Smart Hardwire Kit or an Intelligent Hardwire Kit to activate the parking

monitor feature.

WDR

UHD P24+FHDP24

00:00:20

04 / 10 / 2021 17 : 25 : 45

AAAAAAAA

WDR

UHD P24+FHDP24

00:00:20

04 / 10 / 2021 17 : 25 : 45

AAAAAAAA

1 2 4 53

11 10

18 17 16

Get Started

Step 1

Installing Adhesive Mount

Place the 3M adhesive on the mount plate and properly orient the mount piece to

the roof and hood line of the vehicle.

Important! Ensure the T-interlock on the mount is oriented in the correct direction.

Firmly press the mount onto the windshield. Wait at least 20 minutes before

mounting the camera.

Orient the mount as shown

Step 2

Mount the Rear Camera

Mount the rear camera as shown below. Use the included rear camera cable to

connect the rear camera to the front camera.

Plug the rear

camera into the

rear camera port

Rear camera

wiring

instructions

REC MIC

Step 3

Insert the Memory Card

The Rexing V1PGW-4K accepts Class 10/ UHS-1 or higher Micro SD memory cards

up to 256GB. You will need to insert a memory card before recording. Before

inserting or removing a memory card, ensure you've powered down the device.

Gently push the memory card in until you hear a click, and allow the spring release

to push the card out.

Press the POWER

button for about 3

seconds to turn

the power off first

REC MIC

Step 4

Power on the Camera and Format the Memory Card

Place the camera on the mount and carefully route the power cable around the

windshield and tuck it in under the trim.

Power the camera by connecting the charger to the car cigarette lighter and the

camera.

To ensure the V1PGW-4K records to your memory card properly and without error,

we strongly recommend you to format the card within the camera when you're

using the dash cam for the first time.

Note:

Always remember backup important data stored on the memory card before

formatting.

The camera will shut down after 3 seconds when it's disconnect from the power

source and it should begin recording automatically the next time it is powered on.

Plug the mini

USB connector

to the dash cam

Route the

power cable

Plug the charger

into the power

outlet or a

cigarette lighter

REC MIC

All data will be

deleted

Cancel

Press the

button twice

Press the OK

button to confirm

formatting the

memory card

REC MIC

V.1.0

LCD

Setup

3/3

Screen Saver

Default Setting

Version

Format

To format the memory card, first press the REC button to stop recording. Then

press the MENU button twice to enter the Setup Settings. Use the REC and MIC

buttons and toggle to the Format. Press the OK button to confirm the format.

Indice

Manuali Telecamera da cruscotto popolari di altre marche

Cansonic

Cansonic UltraDuo Z2 Manuale utente

Gazer

Gazer F720 Manuale utente

HP f500g Manuale utente

Xblitz

Xblitz TANGO 4K Manuale utente

Maka Technologies

Maka Technologies Marbella MXPro Manuale utente

NESA

NESA NRC-80DLM Istruzioni per l'installazione e il funzionamento

Kaiser Baas

Kaiser Baas R20 Manuale utente

Boyo

Boyo VTM43TC Manuale utente

Minolta

Minolta MNCD37 Manuale utente

Thinkware

Thinkware FA10 Manuale utente

Momento

Momento MD-5200 Manuale utente

BlackVue

BlackVue DR590X-1CH Manuale utente

HP F300 Manuale utente

CammSys

CammSys BlackSys BH-300 Manuale utente

Snooper

Snooper DVR-2HD Manuale utente

Lukas

Lukas Q900 Manuale utente

RVS

RVS 450C Manuale utente

BlackVue

BlackVue 750G PRO Guida di riferimento