Superior MAGVIBE PRO Manuale utente

MVP-300_20210713_REV_A

MVP 300 User Manual

P/n: D-17836

MVP-300_20210713_REV_A

General

Safety symbols:

WARNING! If used incorrectly the machine can cause injury.

Please read the Operator’s Manual thoroughly making sure you understand how to use

the machine before use.

Always wear personal protective equipment (PPE) such as gloves, eye protection, hearing

protection, and a hard hat. Jobsites might require certain protective equipment be used

due to national and local regulations and insurance policies. Make sure you check with

the jobsite foreman for requirements before work begins.

Dear Customer,

Thank you for choosing a Isoplam srl product. It is our intent to deliver the best

products possible. Delivering innovative, well-built, ergonomic, efficient products is our

goal to help you do the best job possible. Safety, and innovation are our cornerstone of

design.

This Operator’s Manual is a valuable document. Print it and make sure it is always

accessible when using the machine. If you lend or sell this machine, make sure that this

document is also transferred, so the new user will know how to properly use and

maintain it. It is available for download at: www.superiorinnovationsinc.com\manuals

User Responsibility

It is the owner’s / employer’s responsibility to ensure that the operator is properly

trained and has sufficient knowledge about how to use this machine safely. Supervisors

and operators must read and understand the operators Manual. They must be aware of

the safety instructions, limitations, proper use and maintenance. Local and national

legislation may regulate the use of this machine. Find out what legislations are applicable

in your location before use.

MVP-300_20210713_REV_A

Isoplam srl Reservation

All of the information and data in this Operator’s Manual was up to date at the time the

Operator’s Manual was sent to print. Isoplam srl research and development is

continually working on product development and improvements. Therefore, we

reserve the right to modify the design, appearance and features of the product without

prior notice. The most current version of manuals can be found at:

www.superiorinnovationsinc.com\manuals

Vibration Warning

WARNING! Overexposure to vibration can lead to circulatory damage and or nerve

damage, especially in people who have impaired circulation. Contact your doctor if you

experience symptoms of overexposure to vibration. Symptoms include: numbness, loss

of feeling, tingling, pricking, pain, loss of strength, and changes in skin color and

condition. These conditions normally occur in the fingers, hands or wrists and can be

further increased in cold temperatures.

Transportation and Storage

After work is completed, remove the MagVibe™ Pro and or ProTilt©from the float and

thoroughly wipe down before the concrete has time to setup. DO NOT USE A PRESSURE

WASHER OR SUBMERGE IN WATER! There are sensitive electronics and not all areas can

be water tight.

Secure the equipment during transportation to avoid transport damage and accidents.

Store in a lockable area so that it is not able to be accessed by children or unauthorized

persons.

Due to the lithium ion battery, the temperature cannot exceed 140°F (60°C).

Personal Protective Equipment (PPE)

You must use approved personal protective equipment (PPE) whenever you use the

machine. Personal protective equipment cannot eliminate injury, but it will reduce the

degree of injury if an accident does happen. Ask your dealer for help in choosing the

right protective equipment.

Common Sense

It is not possible to cover every conceivable situation. Exercise care and use common

sense if you get into a situation where you feel unsafe. Stop and seek expert advice

by contacting Isoplam srl, Inc., a service dealer or an experienced user. Do not

attempt any task that you are unsure of.

MVP-300_20210713_REV_A

Work Area Safety

Observe your surroundings to ensure nothing can affect your control of the machine.

Observe your surroundings to ensure there is no risk of people or animals that can come

into contact with the machine while in operation.

Do not use machine in bad weather, such as heavy rain, strong winds, intense cold, or

heavy fog. Working in such weather is trying and can lead to difficult situations.

Ensure that the work area is sufficiently illuminated to create a safe working

environment.

Make sure that there are no electrical cables routed in the working area.

Make sure that the work area is clear, clean and free of obstacles that can cause trips or

spills.

Before Starting

Inspect equipment to ensure that there are no loose fasteners, cracks, leaks, or other

obvious damage. If there are do not use until the problems are corrected.

Make sure that daily maintenance has been completed.

Make sure that the MagVibe™ Pro battery is fully charged.

In the Box

(Optional)

MVP-300_20210713_REV_A

Warranty

New equipment sold by Isoplam srl is warranted to be free from manufacturing defects

under normal service for a period of one (1) year from date of purchase by the original

consumer. Component manufacturers offer separate warranties and are covered

separately. These components are the lithium polymer battery, the electric motor, RF

remote control batteries (27A) and the battery indicator. These components carry a 180-

day warranty from the original date of purchase. For complete information or to request

a return goods authorization number (RGA#) call technical service at (844) 624-8423.

Superior Innovation’s obligation under this warranty is expressly limited to the

replacement or repair at our service facility or one that has been pre-authorized by

Isoplam srl.

This warranty does not apply to defects caused by damage, unreasonable use, faulty

repairs made by others or defects caused by failure to provide reasonable maintenance,

while in the possession of the consumer. Further, the warranty is void if the product, or

any of its components, is altered or modified by the consumer or if the product is used in

an inappropriate manner not recommended by the manufacturer.

The main case of the MagVibe™ is protected from opening by tamperproof fasteners

and has a void if opened decal to ensure the case is not opened. If the void warranty

decal is torn, removed, or damaged the warranty will be void.

In addition, a color changing water infiltration decal is located inside the MagVibe™ pro

main case. If the decal changes from white to red, the warranty will also be void. This is

due to use of a pressure washer or submersion in water.

MVP-300_20210713_REV_A

Description / Features / Controls

MVP-300_20210713_REV_A

Description / Features / Controls

MVP-300_20210713_REV_A

QAS™is a quick attach system designed to make it quick and easy to attach a MagVibe™Pro, ProTilt©, or

accessories to a ProFloat™©, other Superior tools and even other manufacturers floats. The ability to

quickly Remove the pivot allows for stacking of floats for transportation, easier cleanup and the ability to

switch floats or other tools very fast. The MagVibe™Pro, ProTilt©and ProFloat™©have a built-in QAS™

mounts. For other types of floats there are a variety of QAS™adapters: The QAS™-M is a four-bolt

adapter, the QAS™-W is a t-washer adapter for channel mount floats. There is also a QAS™-F adapter

that converts a standard four-bolt pivot to have a quick attach system so you can attach to a ProFloat™©.

MagVibe™ MVP 300 attachment to a ProTilt

Make sure QAS knobs

are loosened and the

shaft is all of the way

up.

Slide ProTilt onto the

QAS male mount

located on the top of

the MagVibe™ MVP

300.

QAS™-M Adapter

QAS™-F Adapter

QAS™-W Adapter

MVP-300_20210713_REV_A

Align the center of the ProTilt with the center mark

on the MagVibe™ as shown. This will help align the

QAS knob shafts with the MagVibe™ shaft extensions.

Slightly tighten the QAS knobs to where the QAS shaft

engages with the MagVibe™ shaft extensions.

Now you are ready to slide the system onto the

ProFloat™ or other tools.

To permanently attach your ProTilt to the

MagVibe™ you can now tighten the two M6 set

screws up against the ProTilt base using a 3mm

Allen key.

MVP-300_20210713_REV_A

ProFloat™© Attachment

Decide which direction you want to

mount the ProFloat™. We recommend

that the cutting edge be facing the

operator when cutting high spots and

filling low spots. Once this is done the

ProFloat™ can be quickly rotated 180° to

open the concrete on the way out, and

seal on the way back.

Loosen both QAS™knobs by turning

them counter-clockwise.

Align the QAS™ receptacle with the QAS™ dovetail and slide over to engage.

Center the MagVibe Pro™ over the

QAS™dovetail and tighten both

QAS™ knobs by turning them

clockwise. DO NOT OVERTIGHTEN.

Opens Concrete

Seals Concrete

Altri manuali per MAGVIBE PRO

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Superior Utensili

Superior

Superior PBM-2500 Manuale utente

Manuali Utensili popolari di altre marche

Martor

Martor SECUNORM 175 Manuale utente

ERKCO

ERKCO 1000 Manuale utente

jbc

jbc N4473 Manuale utente

FEINMETALL

FEINMETALL FZWZ-SET-001 Manuale utente

Worx Professional

Worx Professional Sonicrafter WU676 Manuale utente

Gage Bilt

Gage Bilt GB713SH Manuale utente

Hilti

Hilti DX 9-ENP Manuale utente

norbar

norbar NORTRONIC 34399 Manuale utente

BGS technic

BGS technic 8578 Manuale utente

Makita

Makita DHR241 Manuale utente

Motor Guard

Motor Guard JMB-1250 Manuale utente

Power Adhesives

Power Adhesives 805-12 Manuale utente

Clemco

Clemco 24189 Manuale utente

VVG

VVG VNG 903 Series Manuale utente

Hilti

Hilti FX 3-A Manuale utente

Grizzly

Grizzly H6472 Manuale utente

axing

axing BWZ 5-02 Manuale utente

Dh-Robotics

Dh-Robotics RGI-100 Come usare