TRENDnet TE100-PCIFC Manuale utente

MicheM

Table of Contents

PRODUCT OVERVIEW 3

PACKAGE CONTENTS..............................................................................3

PRODUCT FEATURES ............................................................................. 4

Driver Support 4

Utilities (Windows only, Vista is not supported) 5

LEDs 5

DRIVER/HARDWRE INSTALLATION 6

INSTALLING DRIVER/HARDWARE............................................................. 6

CONNECTING REMOTE WAKE-UP CABLE ...............................................10

CONNECTING TO YOUR NETWORK .........................................................11

Fiber Adapter 11

Cabling Requirements 12

NIC CONTROL SET UTILITY 13

MY COMPUTER.....................................................................................13

NIC 13

Protocol 13

Service 14

Client 14

GENERAL .............................................................................................15

SETTING...............................................................................................16

STATISTICS...........................................................................................16

DIAGNOSTICS .......................................................................................17

WAKE-UP PACKET.................................................................................17

VLAN SETTINGS...................................................................................18

Add/Remove VLAN 18

Setting for add/remove VLAN 18

VLAN01 (VLAN ID =1) added 18

Driver setting changed by NIC Control Set 19

Remove VLAN/Change VLAN property 20

DOS DIAGNOSTIC UTILITY 21

DIAG UTILITY.......................................................................................21

MAIN MENU..........................................................................................21

FUNCTIONS KEY ...................................................................................21

LOADING NETWORK DRIVERS................................................................22

SPECIFICATIONS 23

Product Overview

Package Contents

When you unpack the product package, you shall find the items listed below.

Please inspect the contents, and report any apparent damage or missing items

immediately to our authorized reseller.

•TE100-PCIFC

•Multi-Language Quick Installation Guide

•CD-ROM (Driver & User’s Guide)

Product Features

zProvide

One 100Base-FX port

zfiber connections:

SC type multi-mode connector

Compliant with IEEE 802.3u 100Base-FX

PCI 2.1, 2.2 Specification compliant

zSeparate 2K Bytes FIFO for receive and transmit controllers

zFlow Control:

Support IEEE 802.3x for full duplex

Multiple pause frame XON/XOFF

zACPI (Advanced Configuration and Power Interface):

Support PC99, PC2001 and Net PC hardware system requirements

Support PCI Bus Power Management Interface Specification

Version 1.0/1.1

Support ACPI Specification 1.0

Support Network Device Class Power Management Specification

Version 1.0a

Support Wake-on-LAN magic packet

zMAC Enhancement Function:

IEEE 802.1q multiple VLAN with VLAN ID auto

insertion/extraction

UDP, TCP/IP checksum offload for Ipv4 frames

zTwo LEDs: LNK/ACT (link/activity), 100 (100Mbps speed)

Driver Support

The Adapter supports a wide range of drivers for commonly used network

operating systems:

zWindows 95 (including OSR2), Windows 98, Windows 98 (including SE),

Windows ME, Win2000, Windows 2003, Windows XP, Workgroups 3.11,

Windows NT 3.51 and 4.0

zLAN Manager, LANtastic, PC-NFS

zNovell Netware 3.11,3.12, 4.x, 5.x, 6.0, Client 32

zLinux Kernel 2.2.x/2.4.x/2.6.x

zFreeBSD 3.2, 4.0, 4.11, 4.2, 5.x

zSCO UnixWare 7.x/OpenUnix 8, SCO UNIX 5.0

Utilities (Windows only, Vista is not supported)

zNIC Control Set

zDos Diagnostic Utility

LEDs

cLNK/ACT Link/Activity

d100 100Mbps

LEDs Status Indication

LNK/ACT

Steady A valid network connection established.

LNK stands for LINK.

Flashing Transmitting or receiving data.

ACT stands for ACTIVITY.

Off Neither connection nor activity.

100 Steady 100Mbps.

Off 10Mbps.

Driver/Hardwre Installation

Installing Driver/Hardware

Windows Vista/2003 Server/XP/2000

Step 1: Insert the Drive CD-ROM into your computer’s CD-ROM drive.

Step 2: Click Install Driver, and then click your operating system.

Step 3: Click OK to finish the installation

Step 5: Turn off the power to the PC.

Step 6: Remove any metal decorations from your hands and wrists.

Step 7: Remove the cover from your PC.

Step 8: Locate an empty, non-shared bus mastering PCI slot and remove the corresponding

backplate. Save the screw for use in Step 10.

<Note>

i. Do not install the TE100-PCIFC in a shared PCI slot. Avoid any PCI slot next to an ISA slot because this

is often a shared slot and does not support bus mastering.

ii. If you are going to install the Remote Wake-Up cable, choose an available PCI slot most close to the 3-

pin Remote Wake-Up connector on the PC motherboard.

iii. If you have problems in identifying a suitable slot, check your PC documentation or ask your system

administrator for help.

Step 9: Carefully insert the TE100-PCIFC into the chosen slot and press firmly with proper push

to ensure it is fully seated in the slot.

Step 10: Secure the TE100-PCIFC with the screw you saved in step 8.

<Note> If you wish to use the Remote Wake-Up function, please complete the installation in next section

“Connecting the Remote Wake-Up Cable” before proceeding to step 10.

Step 11: Replace the PC cover.

Step 12: Proceed to “Connecting to Your Network” section.

Install the TE100-PCIFC into the PCI slot and screw it onto the backplate.

Windows 98/ME

Step 1: Insert the Drive CD-ROM into your computer’s CD-ROM drive. Then click Exit.

Step 2: Turn off the power to the PC.

Step 3: Remove any metal decorations from your hands and wrists.

Step 4: Remove the cover from your PC.

Step 5: Locate an empty, non-shared bus mastering PCI slot and remove the corresponding

backplate. Save the screw for use in Step 6.

<Note>

i. Do not install the TE100-PCIFC in a shared PCI slot. Avoid any PCI slot next to an ISA slot because this

is often a shared slot and does not support bus mastering.

ii. If you are going to install the Remote Wake-Up cable, choose an available PCI slot most close to the 3-

pin Remote Wake-Up connector on the PC motherboard.

iii. If you have problems in identifying a suitable slot, check your PC documentation or ask your system

administrator for help.

Step 6: Carefully insert the TE100-PCIFC into the chosen slot and press firmly with proper push

to ensure it is fully seated in the slot.

Step 7: Secure the TE100-PCIFC with the screw you saved in step 4.

<Note> If you wish to use the Remote Wake-Up function, please complete the installation in next section

“Connecting the Remote Wake-Up Cable” before proceeding to step 7.

Step 8: Replace the PC cover.

Step 9: Turn the PC on again.

Step 10: When the autorun pop up, click Install Driver, and then click your operating system.

<Note>If the autorun did not appear, please go to the disk driver, right click on the explorer. In the

Driver folder, click the the driver of

Windows 98SE_ME_2K_XP_Srv2003_Vista x86 Edition, then click WinSep.exe to

execute the program.

Step 11:Wait until the TE100-PCIFC finishes the installing.

Step 12: If the following screen pop up, insert the Windows 98SE CD-ROM into CD-ROM driver.

(For Windows 98SE only)

Step 13: Click OK to reboot your computer.

Connecting Remote Wake-Up Cable

The unit support optional Wake-on-Lan magic packet feature. Proceed with the

installation only when your PC supports this remote wake-up and you wish to

use this function. If your PCI bus supports version 2.2 or higher, there is no

Wake-Up cable required. The feature can be enabled without using the cable.

For more detail information, please check the User’s Guide of your Motherboard.

Wake-on-LAN magic packet

Step 1: Make sure the power to the PC is off.

Step 2: Check if the TE100-PCIFC is properly installed in a PCI slot.

Step 3: Prepare a Remote Wake-Up cable. Connect the cable from TE100-PCIFC to motherboard

connector.

Step 4: Replace the PC cover.

Step 5: Proceed to “Connecting to Your Network” Section.

Connect Remote Wake-Up cable from TE100-PCIFC to motherboard connector.

Plug in Remote Wake-Up cable to connector on Ethernet Adapter.

Altri manuali per TE100-PCIFC

Indice

Altri manuali TRENDnet Scheda PCI

TRENDnet

TRENDnet TFU-H33PI Manuale utente

TRENDnet

TRENDnet TU3-H2PIE Manuale utente

TRENDnet

TRENDnet TEW-643PI Manuale utente

TRENDnet

TRENDnet TE100-PCIFXplus Manuale utente

TRENDnet

TRENDnet Alpha WUS-N10M Manuale utente

TRENDnet

TRENDnet TEG-PCISXM2 Manuale utente

TRENDnet

TRENDnet TEG-PCITXM2 Manuale utente

TRENDnet

TRENDnet TEW-623PI Manuale utente

TRENDnet

TRENDnet TEG-ECSX - Manuale utente

TRENDnet

TRENDnet TE100-PCIWA Manuale utente

TRENDnet

TRENDnet TEW-703PI Manuale utente

TRENDnet

TRENDnet TEW-443PI Manuale utente

TRENDnet

TRENDnet TE100-PCIE Manuale utente

TRENDnet

TRENDnet TEW-623PI Manuale utente

TRENDnet

TRENDnet TEW-228PI Manuale utente

TRENDnet

TRENDnet TEG-ECSX - Manuale utente

TRENDnet

TRENDnet TEW-501PC Manuale utente

TRENDnet

TRENDnet TU2-H5PI Manuale utente

TRENDnet

TRENDnet TEW-421PC Manuale utente

TRENDnet

TRENDnet TFW-H3PI Manuale utente

TRENDnet

TRENDnet Te100-pciwn Manuale utente

TRENDnet

TRENDnet TE100-PCIWplus Manuale utente

TRENDnet

TRENDnet TEW-223PI Manuale utente

TRENDnet

TRENDnet TEW-PCI Manuale utente

Manuali Scheda PCI popolari di altre marche

ERMA

ERMA SSI 1417 Manuale utente

SIIG

SIIG CyberSerial Dual PCI Istruzioni per il montaggio

Moxa Technologies

Moxa Technologies CP-102E Manuale utente

I-Bus

I-Bus IBC2602 Manuale utente

Exsys

Exsys EX-60102 Manuale utente

Chelsio Communications

Chelsio Communications T5 Series Manuale utente

Conrad Electronic

Conrad Electronic 97 46 71 Manuale utente

Micro Innovations

Micro Innovations USB650A Manuale utente

KTI Networks

KTI Networks KF-310 Manuale utente

Asus

Asus SpaceLink WL230 Manuale utente

SIIG

SIIG SC2475 Manuale utente

Belkin

Belkin F5D7000F Manuale utente

Pericom

Pericom PI7C7100 Manuale utente

ADLINK Technology

ADLINK Technology cPCI-3548 Manuale utente

Digium

Digium TE200 Series Manuale utente

Allo.com

Allo.com 2nd Gen E1/T1/J1 Manuale utente

Western Digital

Western Digital FireWire PCI Adapter Manuale utente

Pyle

Pyle Gamelink PLINK1 Manuale utente