TRENDnet TEG-S2400I - DATA SHEETS Manuale utente
TEG-S2600i
Quick Installation Guide
TEG-S2400i
Table of Contents
Table of Contents
Version 10.31.05
English ......................................................................................................
Troubleshooting ........................................................................................
1
1
2
3
5
1. Before You Start
2. How to Connect .................................................................................
3. Using the Switch ................................................................................
.................................................................................
1. Before You Start
English
1
TEG- 2400i/TEG- 2600i
Quick Installation Guide
User’s Guide CD-ROM
AC power cord
RS-232 cable
Rack Mount Kit
S S
Package Content
Application
Workstations with
Fast Ethernet Card
(TE100-PCIWN)
1000Mbps
100Mbps
TEG-S2400i/TEG-S2600i
Server with
Copper Gigabit PCI Adapter
(TEG-PCITXR)
Multi-mode
Mini GBIC Module
(TEG-MGBSX)
2. Connect the network cable to the front of the
switch and your PC.
1. Connect the AC Power cord to the back of
the TEG-S2400i/TEG-S2600i.
3. Verify that the PWR led displays a solid
green light.
2. How to Connect
English
2
English
3
1. Go to Start > Settings >
Control Panel.
2. Double-Click the Network
Connection Icon.
3. Right-Click Local Area
Connection, and select
Properties.
3. Using the Switch
Note: For more detail on advanced features, please consult the User's Guide.
Your installation is now complete.
7. Select the appropriate option to
configure the SNMP switch.
6. User Name: admin
Password: 123
5. Open your web browser, type
http://192.168.223.100, and press
Enter.
4. Click the General tab, select
Internet Protocol(TCP/IP), and
click Properties. Change the IP
address to 192.168.223.10 and
click OK to apply the settings.
English
4
Q1.
A1.
Q2.
A2.
Q3.
A3.
How come I cannot see any light from any of my LED's?
Your TEG-S2400i/TEG-S2600i is not getting any power. Make
sure that your surge protector or your outlet is getting power and make
sure that the AC Power cord is properly connected to your switch.
After connecting several workstations to the switch, I have all
workstations communicating with the server, but I cannot access the
switch's web configuration utility. What should I do?
Please change your switch's IP address to match the network
segment of your workstations. For configuring your switch's IP address,
please consult the User's Guide.
I have connected several workstations into the switch, but one
workstation does not connect to the network. The LEDs on one of the
ports remain unlit, while the rest of the ports have blinking LEDS. What
do I do?
You either have a faulty network card or a faulty network patch cable.
Make sure that your network card and network cable are functional.
If you have any questions regarding your switch please contact TRENDnet
Technical Support Department.
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received.
Including interference that may cause undesired operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
5
Troubleshooting
Copyright ©2006. All Rights Reserved. TRENDnet.
3135 Kashiwa Street
Torrance, CA 90505
USA
TRENDnet Technical Support
Tech Support Hours
24/7 Toll Free Tech Support
Contact
Telephone: 1(866) 845-3673
Email: [email protected]
Contact
Tech Support Hours
Telephone:
Deutsch :+49 (0) 6331 / 268-460
Français :+49 (0) 6331 / 268-461
0800-90-71-61 (numéro vert)
Español :+49 (0) 6331 / 268-462
English :+49 (0) 6331 / 268-463
Italiano :+49 (0) 6331 / 268-464
Dutch :+49 (0) 6331 / 268-465
Fax: +49 (0) 6331 / 268-466
8:00am - 6:00pm
Middle European Time
Monday - Friday
Product Warranty Registration
Please take a moment to register your product online.
Go to TRENDnet’s website at http://www.trendnet.com
US/Canada Support Center European Support Center
Altri manuali per TEG-S2400I - DATA SHEETS
5
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali TRENDnet Interruttore
TRENDnet
TRENDnet TPE-TG82ES Manuale utente
TRENDnet
TRENDnet TEG-S28TX Manuale utente
TRENDnet
TRENDnet TI-PG1284i Manuale utente
TRENDnet
TRENDnet TL2-PG284 Manuale utente
TRENDnet
TRENDnet TK-802R Manuale utente
TRENDnet
TRENDnet TL2-E284 Manuale utente
TRENDnet
TRENDnet TK-803R Manuale utente
TRENDnet
TRENDnet TE100-S32plus Manuale utente
TRENDnet
TRENDnet TK-205K - PS/2 KVM Switch Manuale utente
TRENDnet
TRENDnet TPE-1016L Manuale utente
TRENDnet
TRENDnet TE100-S16V Manuale utente
TRENDnet
TRENDnet TK-204UK - DVI USB KVM Switch Manuale utente
TRENDnet
TRENDnet TEG-S5g - Gigabit GREENnet Switch Manuale utente
TRENDnet
TRENDnet TK-407K - KVM Switch - USB Manuale utente
TRENDnet
TRENDnet TPE-224WS - Web Smart PoE Switch Istruzioni operative
TRENDnet
TRENDnet TEG-S16Dg Manuale utente
TRENDnet
TRENDnet TPE-T88G Manuale utente
TRENDnet
TRENDnet TU-400 Manuale utente
TRENDnet
TRENDnet TEG-S224TX Manuale utente
TRENDnet
TRENDnet TK-408K Manuale utente
