IBASE Technology IB903F Manuale utente
IB903F
AMD®Embedded G-Series
3.5”Disk Size SBC
USER’S MANUAL
Version 1.0
ii
IB903F User’s Manual
Acknowledgments
AMI is a registered trademark of American Megatrends Inc.
PS/2 is a trademark of International Business Machines
Corporation.
AMD is a registered trademarks of AMD Corporation.
Microsoft Windows is a registered trademark of Microsoft
Corporation.
Fintek is a registered trademark of Fintek Electronics Corporation.
All other product names or trademarks are properties of their
respective owners.
IB903F User’s Manual iii
Table of Contents
Introduction.......................................................1
Product Description.............................................................1
Checklist..............................................................................2
IB903F Specifications.........................................................3
Board Dimensions...............................................................4
Installations.......................................................5
Installing the Memory.........................................................6
Setting the Jumpers.............................................................7
Connectors on IB903F ......................................................11
BIOS Setup.......................................................23
Drivers Installation......................................41
VGA Drivers Installation..................................................42
Realtek HD Audio Driver Installation ..............................46
LAN Drivers Installation...................................................47
Appendix............................................................48
A. I/O Port Address Map ..................................................48
B. Interrupt Request Lines (IRQ)......................................49
C. Watchdog Timer Configuration ...................................50
iv
IB903F User’s Manual
This page is intentionally left blank.
INTRODUCTION
IB903F User’s Manual 1
Introduction
Product Description
The IB903F is a 3.5-inch single board computer based on the AMD®
Embedded G-series (SoC) APU. The Embedded G-series (SoC) APU
-based board delivers an exceptionally high-definition visual experience
and offers improved CPU performance over Embedded G-series (SoC)
APU. The SOC’s advanced GPU enables parallel processing and
high-performance graphics processing that provides up to 20%
improvement vs. AMD G-Series APU.
The IB903F platform is well-suited for low-power and high-performance
designs in a broad range of markets including Industrial Control &
Automation, Digital Signage, Thin Client, Electronic Gaming Machines,
and SMB storage appliances.
IB903F Features:
Supports AMD®Embedded G-series (SoC) processors
One DDR3 SO-DIMM, 1333/1600 MHz, Max. 8GB memory
Integrated graphics for DVI-I, LVDS displays
2 x SATA III connector
4x COM port connector
2 x Mini-PCIe(x1) slot (w/ USB support)
2x GbE (RJ-45) connector
1x 9V to 24V DC-IN power connector
INTRODUCTION
2
IB903F User’s Manual
Checklist
Your IB903F package should include the items listed below.
The IB903F SBC
This User’s Manual
1 CD containing chipset drivers and flash memory utility
INTRODUCTION
IB903F User’s Manual 3
IB903F Specifications
Product Name
IB903F (Default model name on PCB surface)
Form Factor
3.5”Disk Size SBC
CPU
Type/Speed
AMD Embedded G-series SoC (CPU+GPU+NB), 28nm process
technology
Quad Core @ 2.0 GHz (TDP=25 W) [Default, IB903F-Q2G]
Dual Core @ 1.6 GHz (TDP=15W) [Optioanl][IB903F-16]
Dual Core @ 1.5 GHz (TDP=9W) [Optioanl][IB903F]
Chipset
FT3 BGA package (24.5mm x 24.5mm)
BIOS
AMI BIOS, supports ACPI Function
Memory
1 x DDR3(L)-1600 @ 1.5V(1.35V) SO-DIMM, Single Channel (Max.
8GB) ,No-ECC
VGA
AMD Embedded G-series SoC built-in GPU, supports 2 independent
displays, DirectX®11.1, DisplayPort 1.2,
- DVI-I ( DP#1[DVI] + CRT)
LVDS
24-bit dual-channel LVDS –via SoC DP#0 w/ Analogix ANX3110
LAN
Realtek RTL8111G-CG x 2 for dual PCIe GbE LAN
32-pin QFN package
USB
2 x USB 3.0 Ports –via SoC built-in XHCIs
6 x USB 2.0 Ports –via SoC built-in EHCIs
Serial ATA
Ports
SoC Integral SATA III (6.0Gb/s) controllers, supports 2 ports
Audio
SoC Integral HDA + Realtek ALC269Q-VC2 Codec [6mm x 6mm @
MQFN48] with class-D speaker amplifier(2.3W per channel @ 5V
power supply)
Supportf 2-channel audio out + amp
LPC I/O
Fintek F81846AD-I
- COM#1(RS232/422/485), jumper-less select(SP339), supports pin-9
with power(500mA)
- COM#2 ~#4 (RS232 only)
- Hardware Monitor (2 thermal inputs, 4 voltage monitor inputs & 1 x
Fan header)
Digital IO
4 in & 4 out
Expansion
Slots
Mini PCI-e socket x 2 (1x Full-sized+1xHalf-sized)
**Full-sized MiniPCIe(1x) supports mSATA**
Edge
Connector
DVI-I, 2x RJ45, 2x USB, COM1
Onboard
Header/
Connector
4x USB 2.0, 2x DF13 for 24-bit dual channel LVDS,
Audio, speaker, COM2, COM3/4, LPC (80-port card debugging
purpose), 2x Mini PCI-e(1x), backlight/brightness control, 2x power
connector SATA HDD [JST type]
[Watchdog
Timer
Yes (256 segments, 0, 1, 2…255 sec/min)
Power
Connector
+9V ~ +24V DC-in
Others
- i-Smart function (TI MSP430G2433 MCU)
- AT24C02C EEPROM [SO8 type] via SMbus (Optional)
OS Support
- Windows 7, Windows 8
- Linux
RoHS
Yes
Board Size
102mm x 147mm
INTRODUCTION
4
IB903F User’s Manual
Board Dimensions
INSTALLATIONS
IB903F User’s Manual 5
Installations
This section provides information on how to use the jumpers and
connectors on the IB903F in order to set up a workable system. The
topics covered are:
Installing the Memory............................................................................ 6
Setting the Jumpers................................................................................ 7
Connectors on IB903F......................................................................... 11
INSTALLATIONS
6
IB903F User’s Manual
Installing the Memory
The IB903F board supports one DDR3 memory socket for a maximum
total memory of 8GB DDR3 memory type.
Installing and Removing Memory Modules
To install the DDR3 modules, locate the memory slot on the board and
perform the following steps:
1. Hold the DDR3 module so that the key of the DDR3 module aligned
with that on the memory slot.
2. Gently push the DDR3 module in an upright position until the clips
of the slot close to hold the DDR3 module in place when the DDR3
module touches the bottom of the slot.
3. To remove the DDR3 module, press the clips with both hands.
Indice
Altri manuali IBASE Technology Scheda madre
IBASE Technology
IBASE Technology MI945PA Manuale utente
IBASE Technology
IBASE Technology IB827 Manuale utente
IBASE Technology
IBASE Technology MI910E Manuale utente
IBASE Technology
IBASE Technology MI992 Manuale utente
IBASE Technology
IBASE Technology MI985 Manuale utente
IBASE Technology
IBASE Technology MB870 Manuale utente
IBASE Technology
IBASE Technology MB930-R Manuale utente
IBASE Technology
IBASE Technology MI991AF Manuale utente
IBASE Technology
IBASE Technology MI808 Manuale utente
IBASE Technology
IBASE Technology MB998 Series Manuale utente
IBASE Technology
IBASE Technology MB995 Manuale utente
IBASE Technology
IBASE Technology IB945 Manuale utente
IBASE Technology
IBASE Technology MI958 Manuale utente
IBASE Technology
IBASE Technology MB991AF Manuale utente
IBASE Technology
IBASE Technology MI991 Manuale utente
IBASE Technology
IBASE Technology IB915F Manuale utente
IBASE Technology
IBASE Technology IB895 Manuale utente
IBASE Technology
IBASE Technology MBN500 Manuale utente
IBASE Technology
IBASE Technology MI970VF Manuale utente
IBASE Technology
IBASE Technology MB991 Manuale utente
Manuali Scheda madre popolari di altre marche
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuale utente
Gigabyte
Gigabyte GA-9IVDT Manuale utente
Texas Instruments
Texas Instruments ADS8372EVM Manuale utente
Commell
Commell MS-C73 Manuale utente
IBT Technologies
IBT Technologies MB860 Manuale utente
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuale utente
