LIMIT 5100 Manuale utente
Coating Thickness Gauge 5100
Language Contents
Language page
English ....................................................................2-3
Svenska..................................................................4-5
Norsk....................................................................... -7
Dansk......................................................................8-9
Suomi......................................................................10-11
Deutsch...................................................................12-13
Nederlands.............................................................14-15
Français..................................................................16-17
Italiano.....................................................................18-19
Español...................................................................20-21
Português...............................................................22-23
Ελληvikά .................................................................24-25
Polski.......................................................................26-27
Eesti.........................................................................28-29
LietuviŠkai...............................................................30-31
Latviski....................................................................32-33
Pycckий ..................................................................34-35
6
1
2
Coating Thickness Gauge Limit 5100.
General information
Limit 5100 measure thickness of coating. E.g. paint,
plastic, porcelain enamel, copper, zinc, aluminium,
chrome galvanizing layer on magnetic and non-
magnetic materials.
Specification
Range 0 – 1000 μm
Reading 0-100 μm 0,1 μm
100-1000 μm 1 μm
Accuracy + 2,5 μm or 1-3 %.
Battery 4 st 1,5 V AAA
Automatic off After 2 minuts
Operation
1. On or manuell OFF. Push the Ө-button.
The instrument will be auto-calibrate so always keep the
probe away from any metal for 3 seconds after power on.
2. Select magnetic or non-magnetic material with N/NF
button. The display indicate Fe for magnetic material or
NFe for non-magnetic material.
3. Select μm for reading in 1/1000 mm.
4. Place the probe on an layer to be measured. Read
the coating thickness on the display.
5. For next measurement lift the probe more than 10
mm and repeat the measurement.
English
3
English
Calibration
1. Place the probe on an uncoated area.
2. Push the ZERO button.
3. Lift the probe.
4. Select a calibration foil according to your
measurement range. Measure the calibration foil on the
uncoated area.
5. Lift the probe and adjust with the ▲▼buttons the
value on the display to same value as foil.
6. Repeat the test measurement and adjust the value
until the result is correct.
It is recommended that calibration is made on same
material as to be measured.
Replace battery
When battery symbol shows on the display.
Remove the battery lid on backside and replace with 4
pcs 1,5 V batterys type AAA.
Indice
Altri manuali LIMIT Strumento di misura
LIMIT
LIMIT 1180-R Manuale utente
LIMIT
LIMIT 4800 Manuale utente
LIMIT
LIMIT 1001HV Manuale utente
LIMIT
LIMIT 7000 Manuale utente
LIMIT
LIMIT 6101 Manuale utente
LIMIT
LIMIT MWA 10 Manuale utente
LIMIT
LIMIT CDN-BT Manuale utente
LIMIT
LIMIT 21461108 Manuale utente
LIMIT
LIMIT MDQ 25 Manuale utente
LIMIT
LIMIT L40 Manuale utente
LIMIT
LIMIT AFB 450 Manuale utente
LIMIT
LIMIT 1000-R Manuale utente
LIMIT
LIMIT 2400 Manuale utente
LIMIT
LIMIT 20 Manuale utente
LIMIT
LIMIT 4700 Manuale utente
LIMIT
LIMIT 2200 Manuale utente
LIMIT
LIMIT DDA Manuale utente
LIMIT
LIMIT DCM 4 Manuale utente
LIMIT
LIMIT MDA 25 Manuale utente
LIMIT
LIMIT 1080-R Manuale utente
