3
1-The main features of the equipment
1.1-Product descripon
This product is a hydraulic li. The product is manual single point lock release, easy to operate. It is suitable for in-
specon, repair and maintenance of a vehicles below 10000LBS.
1.2-Features of the product
When the power unit of the hydraulic li is connected to the power supply ,press the switch, the gear pump works,
and the hydraulic oil pushes the piston rod up, which is brought to the pulley and the pulley and the safety lock
tooth will blink and bite each other during each ascent. At the same me, to ensure that the hydraulic system will
not cause slippage.
1.3-Satey mark of the product
Do not come under the vehicle during
operaon. This can cause injury and
death.
Evacuate to a safe place instantly
the event that the vehicle ps. This
can cause injury or death.
Before lowering the li, check that
there are no obstrucons under the
vehicle or the li arms.
Do not operate damaged equip-
ment.
When the vehicle is lied, do not rock
it as this may dislodge it.
Only trained person may operate
the equipment. Inexperience can
cause accidents.
Do not li a vehicle using on pair of
arms only.
Do not operate the push buon
except the worker.
Do not rock the vehicle when lied. Do
not use a high pressure cleaner to the
vehicle lower part.
To avoid being electrocuted, dis-
connected the main power before
opening the control panel.
To avoid injury, keep your feet clear of
the arms and carriages.
Read and fully understand the man-
ual before using the li.
Not allowed unauthorized persons in
the work area.
Before going under the li. Make
sure that the safety pawls are en-
gaged.
Posion vehicle with center of gravity
midway between adapters.
Make sure that the front and back
balance when placing the car, oth-
erwise the car will fall.
Do not modify the control panel or the
safety funcons as this may impair
their funcon.
