Stratus SAE-UT9000 Guida

Model No. SAE-UT9000

Full Rise Ultra Thin

Scissor Lift

Lifting Capacity 9000 lbs

Installation & Operation &

Maintenance Instructions

Important Note

1. This equipment can not be installed, operated or repaired without reading instructions.

2. Electricity must be hooked up by certified electrician.

3. Do not use this equipment beyond its rated capacity.

STRATUS Full Rise Scissor Lift Installation & Operation & Maintenance Instructions 

 TABLE OF CONTENTS 
 
Safety instructions...........................................................................................................................................................4 
1 Important declarations.................................................................................................................................................4 
2 Qualified operator and user illustrations....................................................................................................................4 
3 Danger notices..............................................................................................................................................................4 
4 Warning signs................................................................................................................................................................5 
5 Noise standard..............................................................................................................................................................5 
6 Training...........................................................................................................................................................................5 
Product overview..............................................................................................................................................................6 
1 Product description.......................................................................................................................................................6 
2 Specifications................................................................................................................................................................6 
3 Construction of the Lift.................................................................................................................................................6 
Installation instructions..................................................................................................................................................7 
1 Preparations before installation..................................................................................................................................7 
2 Precautions during Installation ...................................................................................................................................9 
3 Installation steps......................................................................................................................................................9 
Operation instructions ..................................................................................................................................................15 
1 Operation precautions................................................................................................................................................15 
2 Operation control panel instructions...................................................................................................................15 
3 Flow chart for operation........................................................................................................................................16 
4 Operation instructions...........................................................................................................................................16 
5 Emergency Lowering............................................................................................................................................17 
Trouble Shooting............................................................................................................................................................20 
Maintenance.....................................................................................................................................................................21 
Annex.................................................................................................................................................................................23 
Annex 1. Packing List of the whole lift............................................................................................................................23 
Annex 2. Overall diagram.................................................................................................................................................23 
Annex 3. Hydraulic working system ...............................................................................................................................24 
Annex 4. Wiring diagram..................................................................................................................................................25 
Annex 5. Diagram for air supply connection.................................................................................................................30 
Annex 6. Exploded view of the whole lift.......................................................................................................................30 
Annex 7. Common spare parts list .................................................................................................................................35 
 
 
 
 
 
 
 
 
 
 
 
 
 

STRATUS Full Rise Scissor Lift Installation & Operation & Maintenance Instructions

Foreword

Notes on the operating instructions

The present ORIGINAL OPERATING INSTRUCTIONS are designed to provide sufficient instruction for the

safe operation of the product. The information is provided clearly and concisely. The chapters are arranged

by letter and the pages are numbered continuously.

Our products are subject to ongoing development. Our company reserves the right to alter the design,

equipment and technical features of the system. No guarantee of particular features of the product should

therefore be assumed from the present operating instructions.

Safety notices and text mark-ups

Safety instructions and important explanations are indicated by the following graphics:

Indicates an extremely hazardous situation. Failure to comply with this instruction will result in

severe irreparable injury and even death.

Indicates an extremely hazardous situation. Failure to comply with this instruction may result in

severe irreparable injury and even death.

Indicates a hazardous situation. Failure to comply with this instruction may result in

slight to medium injury.

Indicates a material hazard. Failure to comply with this instruction may result in material damage.

STRATUS Full Rise Scissor Lift Installation & Operation & Maintenance Instructions

1. Safety instructions

1.1 Important declarations

During the warranty period, any quality problem will be properly solved to the user's satisfaction. However, we will

not take any responsibility for whatever bad consequence resulted from improper installation and operation,

overload running or unqualified floor foundation. This lift is specially designed for lifting motor vehicles and not

allowed to use it for any other purposes. Otherwise, we, as well as our sales agent, will not bear any responsibility

of accidents or damages to the lift. Make sure to pay careful attention to the lifting capacity on the label attached

to the lift. Never attempt to lift cars beyond its capacity. Please refer to bellow pictures and table for details.

Read this manual carefully before installation and operation of the machine so as to avoid your property loss or

personnel injury and casualty incurred by the wrong operation. Without the manufacturer’s consent, users are not

permitted to make any modification to the control unit or other mechanical units.

1.2 Qualified operator and user illustrations

•Only the professionally trained person can operate and use the lift.

•Electrical connection must be done by a competent electrician.

•Irrelevant persons are not allowed to be near the lifting area.

1.3 Danger notices

•Do not install the lift on any asphalt floor. The concrete floor should be thick enough to the requirement.

•Read and understand all the operation safety contents before operating the lift.

•The lift is not fit for outdoor use unless it is special tailor-made at the request of the customer.

•Keep hands and feet away from any moving part. To avoid clumping, put your hands and feet away from the

underneath area where the lift is lowering.

•Only the professionally trained person can operate and use the lift.

•Operators are not allowed to wear oversized clothes to avoid being caught by moving parts of the lift.

•Keep the lift surrounding area clean and clear and no stacking to avoid accident happening.

•The lift is designed to lift the entire vehicle but not part of it. Never attempt to lift any cars beyond its capacity.

Model

SAE-UT9000

1900mm

(74.8”)

2000mm

(78.7”)

120mm

(4.7”)

2400kg

(5291lbs)

1600kg

(3527lbs)

2400kg

(5291lbs)

1600kg

(3527lbs)

STRATUS Full Rise Scissor Lift Installation & Operation & Maintenance Instructions

•Make sure the safety latches are in lock position before any attempt to work near or under the vehicle.

•Place the lifting pads to the positions suggested by vehicle makers. Operators are required to increase the

vehicle slowly to make certain it will not slant, roll-over or fall off before lifting the vehicle to the desired

height.1.3.11Always keep checking the lift in case of any damage of the parts. Check the machine

synchronization performance and the agility of moving parts. Do the regular maintenance. If any abnormal

occurs, stop using the lift immediately and contact our dealers for help.

•When operation is finished, descent the lift to its lowest position and cut off the power source

•It is prohibited to modify or change any parts of the lift without manufacturer’s consent.

•If the lift is to stop using for a long time, users are required to:

a. Disconnect the power source;

b. Empty the oil tank;

c. Lubricate moving parts with the hydraulic oil.

1.4 Warning signs

1.5 Noise standard

Noise Standard of the lift should be less than 75dB。For your safety, it is recommended to put sound meter to your

operation area.

1.6 Training

Only the professional person can operate and use the lift. If professional training from manufacturing factory, we

are willing to help in this aspect.

STRATUS Full Rise Scissor Lift Installation & Operation & Maintenance Instructions

2. Product overview

2.1 Product description

This model is on-ground design for user easy installation. Its four cylinders structure makes the lowest 120mm

(4.7”) clearance from ground come true. Its platform extension deign is not only used as a ramp, but also serve as

an extended part of the platform for much longer vehicles. Besides, designs like, 24V working voltage of control

box and limit switch, alarming buzzer from floor 500mm (19.7”), pneumatic safety lock, anti-surge valves, etc.

have fully considered your personal security.

Safety structure:

2.2 Specifications

Model

Lifting capacity

Lifting time

Lifting height

Electrical requirement

SAE-UT9000

4000kg

(9000lbs)

50 Sec

2040mm

(80.3”)

220V/240V/1Ph

380V/415V/3Ph

2.3 Construction of the Lift

STRATUS Full Rise Scissor Lift Installation & Operation & Maintenance Instructions

3. Installationinstructions

3.1 Preparations before installation

3.1.1Tools and equipment needed

√ Electrical drill

√ Open wrenchesФ17, Ф19

√ Screw drivers

√ Anti-wear hydraulic oil (AW32/AW46)

3.1.2 Check List of parts ---Annex 1（Whole lift Packing list）

Open the package and check if all parts as perAnnex 1 are included. Do not hesitate to contact the dealers or

manufacturer in case any part is missing. But if you do not contact us and proceed with installation after

knowing lack of parts, Stratus as well as our dealers will not bear any responsibility for this and will charge for

any parts subsequently demanded by the buyer.

STRATUS Full Rise Scissor Lift Installation & Operation & Maintenance Instructions

3.1.3 Ground conditions

The lift should be fixed on a smooth and solid concrete ground with its strength more than 3000psi, tolerance

of flatness less than 5mm (0.2”) and minimum thickness of 200mm (7.9”). In addition, newly built concrete

ground must undergo more than 28days’ cure and reinforcement. The ground and its installation diagram as

follow.

STRATUS Full Rise Scissor Lift Installation & Operation & Maintenance Instructions

3.2 Precautions during Installation

•Joints of oil hose and electric wire must be firmly connected in order to avoid leakage and wire loosing

•All bolts should be firmly screwed up.

•Do not place any vehicle on the lift in the case of trial running.

3.3Installation steps

Step1: Remove the outer packing shown above and take the platforms out from the unpacked machine

package and place them in level with a gap of 850mm (33.5”) between them onto the floor foundation prepared.

Uptight four pieces of screws fixed on the wood pallet and take the wood pallet away from another platform. Be

careful not to smudge oil hoses.

Step2: Connect oil hose (This step is extremely important, so do refer to the diagram for of oil hose connection

and understand the following instructions before proceeding)

a. Make sure there is nothing obstructed or dirty left in the hose.

b. Installers have to distinguish where the chief oil hose to be connected by referring to the below two pictures

and have the chief hose connected.

c. See the left picture followed by; two branches of the chief oil hose are going to be respectively connected to

the tie-ins for chief oil hose reserved on the hydraulic block and the other scissor. Similarly, branches of the

other two leveling hoses are going to be connected to the tie-ins reserved for leveling hoses.

d. Check if all connections are sealed well.

STRATUS Full Rise Scissor Lift Installation & Operation & Maintenance Instructions

Indice

Altri manuali Stratus Sistema di sollevamento

Stratus

Stratus SAE-C14X Guida

Stratus

Stratus SAE-C12X Guida

Stratus

Stratus SAE-P166M Guida

Stratus

Stratus SAE-S66M Manuale utente

Stratus

Stratus SAE-F14X Guida

Stratus

Stratus SAE-C10P Guida

Stratus

Stratus SAE-C10C Guida

Stratus

Stratus SAE-C9P Guida

Stratus

Stratus MS9000XT Manuale utente

Stratus

Stratus SAE-UT8000 Guida

Stratus

Stratus SAE-C10XE Guida

Stratus

Stratus SAE-F10S Istruzioni per l'installazione

Stratus

Stratus SAE-C12XE Guida

Stratus

Stratus SAE-F12X Guida

Stratus

Stratus SAE-F10P Guida

Stratus

Stratus SAE-P48 Guida

Stratus

Stratus SAE-P410 Manuale utente

Manuali Sistema di sollevamento popolari di altre marche

morse

morse 82H-124 Manuale utente

Braun

Braun NL955 Series Manuale utente

haacon

haacon 1889.10 Manuale utente

Protekt

Protekt AT 252 Manuale utente

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manuale utente

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manuale utente

Genie

Genie Z-60/34 Manuale utente

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manuale utente

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manuale utente

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manuale di programmazione

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manuale di programmazione

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manuale di programmazione

BERG

BERG BeNomic EasyLeaf Manuale utente

Powermate

Powermate LiftGate LG-3 Manuale utente

Snorkel

Snorkel TM12 Series Manuale utente

Terberg

Terberg OMNIDEKA Manuale utente

Harmar Mobility

Harmar Mobility AL625 Istruzioni operative

Rotary

Rotary SPO16 Manuale utente