Optika Italy B-60 Series Manuale utente
Model
B-61
B-62
B-63
B-65
B-66
B-67
B-69
B-60 Series
INSTRUCTION MANUAL
Ver. 2.0 2019
Page 2
1. Warning 3
2. Symbols and conventions 3
3. Safety Information 3
4. Intended use 3
5. Overview 4
5.1 B-61 4
5.2 B-62 / B-63 / B-65 / B-66 / B-67 / B-69 5
6. Unpacking 6
7. Assembling 6
7.1 B-61 6
7.2 B-62 / B-63 / B-66 / B-67 7
7.3 B-65 / B-69 7
7.4 Assembling the microscope 8
7.5 Polarizing set (optional) 8
8. Use of the microscope 10
8.1 Switching the microscope 10
8.2 Light intensity adjustment 10
8.3 Stage 10
8.4 Adjust the interpupillary distance 10
8.5 Diopter adjustment 11
8.6 Use of oil immersion objective 11
8.7 Aperture diaphragm 12
8.8 Use with rechargeable batteries 12
8.9 Battery replacement 12
8.10 Use of the locking screw 12
8.11 Use of the polarizer (optional) 13
8.12 Use of the mirror (only B-61) 13
9. Maintenance 14
10. Troubleshooting 15
Equipment disposal 16
Summary
Page 3
1. Warning
This microscope is a scientic precision instrument designed to last for many years with a minimum of
maintenance. It is built to high optical and mechanical standards and to withstand daily use. We remind you
that this manual contains important information on safety and maintenance, and that it must therefore be made
accessible to the instrument users. We decline any responsibility deriving from incorrect instrument use uses
that does not comply with this manual.
2. Symbols and conventions
The following chart is an illustrated glossary of the symbols that are used in this manual.
CAUTION
This symbol indicates a potential risk and alerts you to proceed with caution.
ELECTRICAL SHOCK
This symbol indicates a risk of electrical shock.
3. Safety Information
Avoiding Electrical Shock
Before plugging in the power supply, make sure that the supplying voltage of your region matches with the
operation voltage of the equipment and that the lamp switch is in o position. Users should observe all safety
regulations of the region. The equipment has acquired the CE safety label. However, users have full responsibility
to use this equipment safely. Please follow the guidelines below, and read this manual in its entirety to ensure
safe operation of the unit.
4. Intended use
For research and teaching use only. Not intended for any animal or human therapeutic or diagnostic use.
Page 4
5. Overview
5.1 B-61
FINE
FOCUS KNOB
EYEPIECE
OBSERVATION
HEAD
MAIN SWITCH / INTENSITY
ADJUSTMENT DIAL
CONDENSER
STAGE
NOSEPIECE
OBJECTIVES
STAGE CLIPS
COARSE
FOCUS KNOB
TRANSPORT
HANDLE
Page 5
5.2 B-62 / B-63 / B-65 / B-66 / B-67 / B-69
MAIN SWITCH / INTENSITY
ADJUSTMENT DIAL
SLIDE HOLDER
STAGE
OBSERVATION HEAD
-) MONOCULAR (B-62 / B-63 / B-65)
-) BINOCULAR (B-66 / B-67 / B-69)
CONDENSER
MAIN SWITCH / INTENSITY
ADJUSTMENT DIAL
NOSEPIECE
X/Y MOVEMENT
KNOBS
FINE
FOCUS KNOB
COARSE
FOCUS KNOB
EYEPIECE
OBJECTIVES
TRANSPORT
HANDLE
Page 6
6. Unpacking
The microscope is housed in a moulded Styrofoam container. Remove the tape from the edge
of the container and lift the top half of the container. Take some care to avoid that the opti-
cal items (objectives and eyepieces) fall out and get damaged. Using both hands (one around the
arm and one around the base), lift the microscope from the container and put it on a stable desk.
Do not touch with bare hands optical surfaces such as lenses, lters or glasses. Traces of grease or
other residuals may deteriorate the nal image quality and corrode the optics surface in a short time.
7. Assembling
Once opened the box, the microscope parts are the following:
7.1 B-61
① Frame
② Monocular observation head
③ Eyepiece
④ Batteries
⑤ Objectives (4X / 10X / 40X)
⑥ Dust cover
⑦ Power supply
③
④
⑤
⑥⑦
①
②
Page 7
7.2 B-62 / B-63 / B-66 / B-67
7.3 B-65 / B-69
① Frame
② Observation head
B-62 / B-63 - monocular
B-66 / B-67 - binocular
③ Eyepiece(s)
④ Batteries
⑤ Objectives
B-62 / B-66 (4X / 10X / 40X)
B-63 / B-67 (4X / 10X / 40X / 60X)
⑥ Dust cover
⑦ Power supply
① Frame
② Observation head
B-65 - monocular
B-69 - binocular
③ Eyepiece(s)
④ Batteries
⑤ Objectives (4X / 10X / 40X / 100X)
⑥ Dust cover
⑦ Immersion oil
⑧ Power supply
③
④
⑤
⑥
⑦
①
②
③
④
⑤
⑥⑦
⑧①
②
Page 8
Fig. 1
7.4 Assembling the microscope
The microscope comes already assembled from the
factory. No assembling procedure is requested.
1. Open the battery compartment placed in the lo-
wer part of the frame. (Fig. 1)
2. Insert batteries, respecting polarity.
3. Close the battery compartment.
4. Plug the jack of the power supply into the socket
① in the back side of the microscope. (Fig. 2)
7.5 Polarizing set (optional)
1. Place the polarizer on the light exit lens ②at the
base of the microscope. (Fig. 3)
2. Using a at screwdriver (not provided) loosen the
xing screws on the two sides of the microscope
③ . (Fig. 4)
Fig. 2
①
Fig. 4
③
Fig. 3
②
Fig. 4
③
Page 9
3. Insert the analyzer in the slot inside the frame ④.
(Fig. 5)
4. Put back the head into its original position and
lock the xing screws.
Fig. 5
④
Page 10
Fig. 6
①
Fig. 7
Fig. 8
②
8. Use of the microscope
8.1 Switching the microscope
Operate on the light intensity adjustment dial ① to
turn ON / OFF the microscope. (Fig. 6)
8.2 Light intensity adjustment
Operate on the light intensity adjustment dial ①to
increase / decrease the illumination voltage. (Fig. 3)
8.3 Stage
B-61
1. Raise the xing clips and place the slide on the
stage.
2. Lower the clips to hold the slide and prevent
accidental falling. (Fig. 7)
B-62 / B-63 / B-65 / B-66 / B-67 / B-69
Stage accepts standard slides 26 x 76 mm,
thickness 1,2 mm with coverslide 0,17mm. (Fig. 8)
1. Open the spring arm of the slide holder ② and
place the slide from the front on the stage.
2. Gently release the spring arm of the slide holder.
• A sudden release of the spring arm could
cause the falling of the slide.
8.4 Adjust the interpupillary distance
B-66 / B-67 / B-69
Hold the right and left parts of the observation head
using both hands and adjust the interpupillary distan-
ce by turning the two parts until one circle of light can
be seen. (Fig. 9)
• The graduation on the interpupillary distance in-
dicator ③, pointed by the spot “.” on the eyepiece
holder, shows the distance between the opera-
tor’s eyes.
The range of the interpupillary distance is 55-75 mm.
Fig. 9
③
Altri manuali per B-60 Series
1
Questo manuale è adatto per i seguenti modelli
7
Indice
Lingue:
Altri manuali Optika Italy Microscopio
Optika Italy
Optika Italy 4083.2 Manuale utente
Optika Italy
Optika Italy B-150P Series Manuale utente
Optika Italy
Optika Italy B-190TB Series Manuale utente
Optika Italy
Optika Italy B-150D-MRPL Manuale utente
Optika Italy
Optika Italy INSPECTION SYSTEMS Series Manuale utente
Optika Italy
Optika Italy B-510 Series Manuale utente
Optika Italy
Optika Italy B-1000 Series Manuale utente
Optika Italy
Optika Italy IM-5FLD Manuale utente
Optika Italy
Optika Italy B-150 Series Manuale utente
Optika Italy
Optika Italy LAB Series Manuale utente
Optika Italy
Optika Italy B-383 Series Manuale utente
Optika Italy
Optika Italy INSPECTION SYSTEMS Series Manuale utente
Optika Italy
Optika Italy B-150D Series Manuale utente
Optika Italy
Optika Italy SZR Series Manuale utente
Optika Italy
Optika Italy ECOVISION Series Manuale utente
Optika Italy
Optika Italy SZ Series Manuale utente
Optika Italy
Optika Italy B-1000 Series Manuale utente
Optika Italy
Optika Italy IM Series Manuale utente
Optika Italy
Optika Italy B-800 Series Manuale utente
Optika Italy
Optika Italy B-510 Series Manuale utente
