VEVOR SMS-025 Manuale utente

Support and E-Warranty Certificate https://www.vevor.com/support

WIRE STRIPPING MACHINE

INSTRUCTION MANUAL

We continue to be committed to providing you with tools at a competitive price. "Save Half",

"Half Price" or any other similar expressions used by us only represent an estimate of

savings you might benefit from buying certain tools with us compared to the major top brands

and do not necessarily mean to cover all categories of tools offered by us. You are kindly

reminded to verify carefully when placing an order with us if you are actually saving half

compared to the top major brands.

- 1 -

MODEL:SMS-025

Have product questions? Need technical support? Please feel free to

contact us:

CustomerService@vevor.com

NEED HELP? CONTACT US!

This is the original instruction, please read all manual instructions

carefully before operating. VEVOR reserves a clear interpretation of our

user manual. The appearance of the product shall be subject to the

product you received. Please forgive us that we won't inform you again if

there are any technology or software updates on our product.

WIRE STRIPPING

MACHINE

- 2 -

This is the original instruction, please read all manual instructions

carefully before operating. VEVOR reserves aclear interpretation of our

user manual. The appearance of the product shall be subject to the product

you received. Please forgive us that we won't inform you again if there are

any technology or software updates on our product.

WARNINGS

Read carefully and understand all ASSEMBLY AND OPERATION

INSTRUCTION before operating. When using the wire stripping machine,

basic safety precautions should always be followed, including the

following:

1. Read and follow all instructions before using the machine.

2. To prevent the risk of electrical shock, do not immerse in water or other

liquids. Use a damp cloth to clean the motor housing.

3. Children shall not play with the appliance. Cleaning and user

maintenance shall not be done by children without supervision.

4. When not in use, unplug from the outlet before installing or removing

parts and before cleaning.

5. Avoid contacting moving parts.

6. Do not operate any machine with a damaged cord or plug or after the

appliance malfunctions or is dropped or damaged in any manner.

Return the appliance to the nearest authorized service facility for

examination, repair, or electrical or mechanical adjustment.

7. The use of attachments not sold by the manufacturer is not

recommended and may cause fire, electric shock, or injury.

8. Do not use outdoors.

9. Do not allow the cord to hang over the edge of the table or counter.

Operation Guide Video

- 3 -

10. Never run the machine unattended.

11. Type Y attachment: If the supply cord is damaged, it must be replaced

by the manufacturer, its service agent, or similarly qualified persons in

order to avoid a hazard.

TECHNICAL PARAMETER

Note: This machine is not applicable to silicone rubber cables or armored

cables.

Model

Dimension

(L*W*H mm)

Weight

(kg)

Voltage

Power

(KW)

Stripping

Range

(mm)

SMS-025

318×250×300

10.8kg

220V-240V~ 50Hz

0.18

∅1.5～∅25

110V~ 60Hz

- 4 -

Parts List

1:M14 plastic nut for regulating blade up and down

2:M14 screw rod for regulating blade up and down

3:Nut for locking screw rod

4:Blade

5:Rolling Gear

6:Feeding Hole

7:Incoming Panel

8:Switch

9:Motor

10:Reducer

- 5 -

Accessories

Details：

1、one 4# allen key 2、one 5# allen key

3、One feeding panle with one hole

4、Plastic nut for exhaust of reducer

- 6 -

Operation Instruction

1.Select the appropriate feeding hole according to the wire diameter.

When the diameter of the wires to be treated does not exceed 13mm,

select the two hole incoming board

When the diameter of the wires to be treated exceeds 13mm, select the

one hole incoming board

- 7 -

2.During wire stripping, the center of the blade must be collinear with the

center of the rolling gear (as shown below)

3. Adjust the height of the blade, and it is best to make the blade scratch

the wire skin without damaging the copper core by rotating the plastic

handle screw (clockwise rotation is downward and counterclockwise

rotation is upward), as shown below.

- 8 -

4.When stripping, adjust the height of the feeding plate according to the

thickness and hardness of the wire (generally, the feeding panel should be

adjusted for thick wire and hard wire and lower for soft wire and thin wire).

In this way, the wire is not easy to be eccentric when stripping

5. When the diameter of the wire to be treated does not exceed 20mm, the

two rolling gears need not be separated

When the diameter of the wire to be treated exceeds 20mm, the two rolling

gears need to be separated by loosening the two screws in the gears.

Indice

Manuali Utensili popolari di altre marche

Martor

Martor SECUNORM 175 Manuale utente

ERKCO

ERKCO 1000 Manuale utente

jbc

jbc N4473 Manuale utente

FEINMETALL

FEINMETALL FZWZ-SET-001 Manuale utente

Worx Professional

Worx Professional Sonicrafter WU676 Manuale utente

Gage Bilt

Gage Bilt GB713SH Manuale utente

Hilti

Hilti DX 9-ENP Manuale utente

norbar

norbar NORTRONIC 34399 Manuale utente

BGS technic

BGS technic 8578 Manuale utente

Makita

Makita DHR241 Manuale utente

Motor Guard

Motor Guard JMB-1250 Manuale utente

Power Adhesives

Power Adhesives 805-12 Manuale utente

Clemco

Clemco 24189 Manuale utente

VVG

VVG VNG 903 Series Manuale utente

Hilti

Hilti FX 3-A Manuale utente

Grizzly

Grizzly H6472 Manuale utente

axing

axing BWZ 5-02 Manuale utente

Dh-Robotics

Dh-Robotics RGI-100 Come usare