VEVOR YL-15T Manuale utente

Technical Support and E-Warranty Certificate www.vevor.com/support

GEAR PULLER

MODEL:YL-15T

We continue to be committed to provide you tools with competitive price.

"Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings

you might benefit from buying certain tools with us compared to the major top brands and doses not

necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully

when you are placing an order with us if you are actually saving half in comparison with the top major brands.

1

MODEL:YL-15T

Have product questions? Need technical support? Please feel free to

contact us:

CustomerService@vevor.com

NEED HELP? CONTACT US!

This is the original instruction, please read all manual instructions

carefully before operating. VEVOR reserves a clear interpretation of our

user manual. The appearance of the product shall be subject to the

product you received. Please forgive us that we won't inform you again if

there are any technology or software updates on our product.

GEAR PULLER

2

Safety & Warning

Read and understand this entire manual before assembling, installing,

operating, or servicing this product. Failure to follow these warnings

and instructions can cause death, personal injury, or damage valuable

property.

While assembling and using this product, keep the work area clean

and well-lighted, and keep spectators and children out of the work

area.

Wear ANSI-approved safety goggles, heavy-duty work gloves, and

safety shoes during use.

Use as intended only.

Before each use, inspect the general condition of the product. Check

for: broken, cracked, or bent parts, loose or missing parts, and any

condition that may affect the proper operation of the product.

After every use, wipe with a clean cloth. Then, store the product in a

safe, dry location out of reach of children and other non-authorized

people.

Ensure only genuine parts are used for replacement & Repair.

Be aware of dynamic loading! The sudden load movement may briefly

create an excess load, causing product failure.

Specifications

Model Series

YL-15T

Max. Tensile Force (t)

15

Max. Jaw Spread(inch)

12

Structural Style

Hydraulic

3

Figure of the Product

Part

Description

Qty

1

Pump Body

1

2

Pull Tab

6

3

Ejector Pin

1

4

Bolt

6

5

Nut

6

6

Handle

1

7

Puller Ring

1

8

Claw Feet

3

4

Installation instructions

Step 1.

Step 2.

5

Step 3.

Step 4.

6

Instructions

A. Oil valve stem screw tightens on deasil first when using.

B. Adjust hook claw to claw hook to hold the objects.

C. Raise the handle hand hole to lift the filling pump upper and lower,

corresponding to going backward; the claw hook has back and forth inside

to insert, and the object is pulled out to draw the quilt.

D. If you want to make the cylinder rod contract back, it only needs to go

back to loosen the right valve stem in a counterclockwise direction; little to

little, the cylinder rod has gone back to contract gradually under the

function of the spring.

E. According to the external diameter of the object, draw distance, and load

strength, choose the corresponding hydraulic pressure of tonnage draw

horses before using, must guard against overloading to use, avoid

damage.

F. In order to prevent causing machines damage for overload, hydraulics

setting set up overload to unload the valve automatically; when the object

at exceeding the specified load, the hydraulic pump will over low oil

automatically, workpiece will don t retreat and enter, should reelect with

large hydraulic pressure of tonnage draw horses at this moment.

Technical Support and E-Warranty Certificate

www.vevor.com/support

Made In China

Indice

Manuali Utensili popolari di altre marche

Martor

Martor SECUNORM 175 Manuale utente

ERKCO

ERKCO 1000 Manuale utente

jbc

jbc N4473 Manuale utente

FEINMETALL

FEINMETALL FZWZ-SET-001 Manuale utente

Worx Professional

Worx Professional Sonicrafter WU676 Manuale utente

Gage Bilt

Gage Bilt GB713SH Manuale utente

Hilti

Hilti DX 9-ENP Manuale utente

norbar

norbar NORTRONIC 34399 Manuale utente

BGS technic

BGS technic 8578 Manuale utente

Makita

Makita DHR241 Manuale utente

Motor Guard

Motor Guard JMB-1250 Manuale utente

Power Adhesives

Power Adhesives 805-12 Manuale utente

Clemco

Clemco 24189 Manuale utente

VVG

VVG VNG 903 Series Manuale utente

Hilti

Hilti FX 3-A Manuale utente

Grizzly

Grizzly H6472 Manuale utente

axing

axing BWZ 5-02 Manuale utente

Dh-Robotics

Dh-Robotics RGI-100 Come usare